Vermont Castings Chateau DVT38 Installation Instructions And Homeowner's Manual page 23

Log Rear F1
Fig. 44 Place log rear onto rear log bracket.
9. Hold the log top right front to back with the narrower
end toward the back. With your left hand, tilt the front
left log slightly up and forward. With your right hand
position the fat end of the top right log on the small
shelf on the back of the front right log. Lower the two
logs in place until the narrower end of the top right
log comes in contact and rests on the top right side
of the rear log. (Fig. 46)
10. Hold the log top left at an angle with the burned
area toward the middle. Set the top left log above
the front left log, matching the indentation on the
bottom of the top left log with the protrusion on the
front left log. Lay the back end of the top left log onto
the rear log. (Fig. 46)
11. Hold the log top middle at an angle with the curve
of the log going from right to left. Position the front
end of the top middle log over the right front log,
matching the protrusion on the right front log with the
indentation on the bottom of the top middle log. Lay
the back end of the middle log onto the rear log and
swing the end of the log from right to left until the
end of the top middle log comes in contact with the
top left log. (Fig. 46)
Log Right
Front F2
Log Left
Front F3
Fig. 45 Place logs left front and right front.
20006081
LG294
Rear log
5/27/03 djt
LG295
front logs
Log Top
Left F6
LG294
Fig. 46 Place middle logs.
Fig. 47 DVT44 logset.
Fig. 48 DVT38 logset.
LG295
Chateau™
Log Top Middle F5
Log Top Right
F4
LG296
LG296
top logs
5/27/03 djt
LG297
LG297
logs in place
5/28/03 djt
LG315
23