Pass/Error Adapter Az266 - Fujitsu YOKOGAWA AF220 Application Note

10 Pass/Error Adapter AZ266

This chapter describes how to output the programming result
For extended functionality within an assembly line, the Pass/Error adapter AZ266 (see
chapter 4.6) may be helpful to output the result of programming.
By this adapter, communication with a SPS-interface is possible.
Yokogawa
Flash-Programmer
AF220
Function PASS
ERASE Chip was erased successfully
BLANK CHECK Chip is empty
PROGRAM Program ended successfully
READ Verify okay
E.P.R. Automatic programming
ended successfully
MCU-AN-390087-E-V10
FLASH PROGRAMMER YOKOGAWA AF220/221
Pass/Error Adapter AZ266
PASS/ERROR
Ext.KEY
Adapter
AZ266
Figure 7-21: Pass/Error adapter AZ266
Table 7-4: Function results
OAK1
OAK2
ERROR
Chip erase failed
Chip is not empty
Programming failed
Verify failed
Automatic programming failed
- 20 - © Fujitsu Microelectronics Europe GmbH
Start Programming
PASS
ERROR