Basic Operation; File Operation - Fujitsu YOKOGAWA AF220 Application Note

7.3 Basic Operation

The basic functions for file handling (load, save, purge, etc.) on the PC-card and for
programming a device are available in the tab "Basic Operations".

7.3.1 File Operation

Within the Group "File Operation" basic functions for handling the data files on the PC-card
can be found:
FILE LOAD copies data from PC-card into the buffer
FILE SAVE stores data from the buffer to the PC-card
FILE PURGE deletes a specific file
Please take care that the file handling is a little bit windows unusual:
Whether files can be marked in the file list, this will not be kept after a file operation is
selected. Within the file operation the filename has to be picked by the buttons + and -.
MCU-AN-390087-E-V10
FLASH PROGRAMMER YOKOGAWA AF220/221
Software – Remote Controller AZ290
Figure 4-18: File operation on PC-card
- 16 - © Fujitsu Microelectronics Europe GmbH