Download Print this page

Fujitsu D3231-S Technotes

Industrial mainboard series
Hide thumbs

Advertisement

TechNotes V1.2
Industrial Mainboard Series
D3231-S
D3235-S
D3236-S
D3243-S

Advertisement

loading

  Also See for Fujitsu D3231-S

  Related Manuals for Fujitsu D3231-S

  Summary of Contents for Fujitsu D3231-S

  • Page 1 TechNotes V1.2 Industrial Mainboard Series D3231-S D3235-S D3236-S D3243-S...
  • Page 2: Table Of Contents

    Basic Layout D3231-S Basic Layout D3235-S Basic Layout D3236-S Basic Layout D3243-S Block Diagram D3231-S & D3236-S Block Diagram D3235-S Block Diagram D3243-S External Connectors D3231-S / D3236-S & D3243-S External Connectors D3235-S 2.10 Onboard components D323x-S 2.11 Onboard components D3243-S 2.12 Summary: Feature Differences D323x-S 2.13...
  • Page 3 D3243-S Single 12V Operation – Min / Max Config [New] 3.23.3 3.24 Chassis Intrusion [Updated] System Monitoring D3236-S / D3231-S: Temperature Sensors and Fan Connectors D3243-S: Temperature Sensors and Fan Connectors D323x-S / D3243-S: SystemGuard D323x-S: SystemGuard - Details D3243-S: SystemGuard - Details SilentFanConfigManager –...
  • Page 4 Driver support for MS Windows XP / MS Win8 [Updated] Memory Issue Possible Power Supply Issue SATA Interface (Intel chipset limitation) SATA / eSATA Signal Quality [New] Graphics driver: Support for Collage Mode TechNotes D323x-S_D3243-S V1.2 Page 4 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 5 Trusted Platform Module (TPM) [Updated] 10.4 System Watchdog (WD) 10.5 BIOS Update / BIOS Recovery 10.6 BIOS/CMOS: Reset Defaults 10.7 BIOS integrated HW Diagnostic Tool 10.8 BIOS integrated Erase Disk Tool TechNotes D323x-S_D3243-S V1.2 Page 5 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 6: Safety Instructions

    I/O connectors) until the mainboard is completely powered down. Any damage caused to the mainboard by misuse of the onboard connectors is excluded from the standard warranty. Fujitsu Technology Solutions cannot be held liable for any damage that results from incorrect use of any onboard connectors.
  • Page 7: Feature Overview

    • Max. four memory sockets DDR3-1333/1600 supporting up to 32GB • Intel Gbit LAN i217LM (“Clarkville”) onboard • iAMT support • Second Intel Gbit LAN i210AT (optional) • Teaming support TechNotes D323x-S_D3243-S V1.2 Page 7 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 8 (2 x DisplayPort V1.2) and 1 x VGA (DVI-I via VGA converter) • Support of 4k resolutions (3840 x 2160) via DisplayPort V1.2 Collage Mode • Support of spanned displays ( • PCI Express Gen3 (Q87) / PCI Express Gen2 (H81) TechNotes D323x-S_D3243-S V1.2 Page 8 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 9 • Internal Socket for USB stick / Dongle onboard (optional) • USB 3.0 onboard • Multichannel audio (5.1) incl. S/PDIF onboard • 6-Layer PCB (D323x-S) resp. 8-Layer PCB (D3243-S) • Improved electrical signal quality • Improved durability TechNotes D323x-S_D3243-S V1.2 Page 9 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 10 BIOS-POST/-Boot & OS – HW Watchdog onboard  Easy SW integration via Windows API & Linux Driver mSATA Socket (D3231-S/D3236-S) resp. mSATA Socket & Mini-PCIe Socket (D3243-S)  for OS installation or harddisk caching incl. USB 2.0 interface for USB-based modules TechNotes D323x-S_D3243-S V1.2...
  • Page 11: Basic Layout D3231-S

    Feature Overview 2.1 Basic Layout D3231-S TechNotes D323x-S_D3243-S V1.2 Page 11 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 12: Basic Layout D3235-S

    Feature Overview 2.2 Basic Layout D3235-S TechNotes D323x-S_D3243-S V1.2 Page 12 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 13: Basic Layout D3236-S

    Feature Overview 2.3 Basic Layout D3236-S TechNotes D323x-S_D3243-S V1.2 Page 13 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 14: Basic Layout D3243-S

    Feature Overview 2.4 Basic Layout D3243-S TechNotes D323x-S_D3243-S V1.2 Page 14 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 15: Block Diagram D3231-S & D3236-S

    Feature Overview 2.5 Block Diagram D3231-S & D3236-S TechNotes D323x-S_D3243-S V1.2 Page 15 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 16: Block Diagram D3235-S

    Feature Overview 2.6 Block Diagram D3235-S TechNotes D323x-S_D3243-S V1.2 Page 16 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 17: Block Diagram D3243-S

    Feature Overview 2.7 Block Diagram D3243-S TechNotes D323x-S_D3243-S V1.2 Page 17 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 18: External Connectors D3231-S / D3236-S & D3243-S

    Feature Overview 2.8 External Connectors D3231-S / D3236-S & D3243-S Audio LAN1 (iAMT) / 2 x USB2.0 LAN2 / 2 x USB 3.0 COM1; DVI-I Dual DisplayPort V1.2 4 x USB 2.0 PS/2 Kbd / Mouse TechNotes D323x-S_D3243-S V1.2 Page 18 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards...
  • Page 19: External Connectors D3235-S

    Feature Overview 2.9 External Connectors D3235-S Audio LAN1 / 2 x USB2.0 DVI-I DisplayPort V1.2 4 x USB 2.0 PS/2 Kbd / Mouse TechNotes D323x-S_D3243-S V1.2 Page 19 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 20: Onboard Components D323X-S

    (BIOS Setup Option) Not available on D3235-S PCIe x16 (16 Lanes, Gen2/3) Up to 4 x PCI PCIe x8 (1 Lane, Gen2, open slot) 1 x PCIe x16 (4 lanes/2lanes, Gen2) TechNotes D323x-S_D3243-S V1.2 Page 20 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 21: Onboard Components D3243-S

    / Mini-PCIe Socket PCIe x16 Gen3 PSU Fan Control PowerSupply ATX/12V S/P-DIF Processor Fan (4 pin) USB3 Stick / GPIO-Port Frontpanel Audio Parallel Port LVDS Backlight 12V Supply (Processor) LVDS 24bit dual channel TechNotes D323x-S_D3243-S V1.2 Page 21 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 22: Summary: Feature Differences D323X-S

    Feature Overview 2.12 Summary: Feature Differences D323x-S D3243-S Feature D3231-S D3236-S D3235-S Chipset (PCH) Memory Sockets / max. RAM 4 / 32GB 4 / 32GB 2 / 16GB 2 / 16GB PCIe x16 (PEG Slot) [Note: Lane splitting not possible!]...
  • Page 23: I/O-Shield

    Feature Overview 2.13 I/O-Shield D3235-S Spring Steel Sheet D3231-S D3236-S Enforcement Sheet D3243-S Nominal force: ~ 75 N for specified ATX IO “letterbox” Rear Side: EMI Gasket (Foam with Copper Nickel Note: ATX Chassis “letterbox” for I/O shield: fabric) Nom. size = 158.75 x 44.45mm Tolerance = +/- 0.2mm...
  • Page 24: Interfaces & Connectors

    Differential audio signal; mono, max. 2W RMS / 4Ohm Note: System Beeps are audible via the internal speaker output only, even if a device is connected to the external audio ports (rear/front) . TechNotes D323x-S_D3243-S V1.2 Page 24 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 25: Internal Serial (Com) Port Connector

    RTS 2 SOUT 2 CTS 2 DTR 2 RI 2 Note: D3235-S: The internal COM-Port is COM1 D3231-S / D3236-S / D3243-S: The internal COM-Port is COM2 3.3 External Serial (COM) Port Connector Pin Signal Pin Signal Pin 1 DCD 1...
  • Page 26: Internal Parallel Port Connector

    3.5 Internal USB2.0 Connector (2 Ports) Pin Signal Pin Signal Pin 1 Pin 2 VCC AUX VCC AUX Data negative Port X Data negative Port Y Data positive Port X Data positive Port Y Not connected TechNotes D323x-S_D3243-S V1.2 Page 26 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 27: Internal Usb3.0 Connector (2 Ports)

    Pin Signal VCC auxiliary (polyswitch fused and power supervision with over current detection) Pin 9 Data negative [USB2.0] Data positive [USB2.0] USB3_RX negative USB3_RX positive Pin 1 USB3_TX negative USB3_TX positive TechNotes D323x-S_D3243-S V1.2 Page 27 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 28: Ps/2 Keyboard Port

    (low asserted pulse) 3.9 PS/2 Mouse Port Pin Signal MOUSE Data Pin 6 Pin 5 Not connected Pin 4 Pin 3 (polyswitch fused) Pin 2 Pin 1 MOUSE CLK Not connected TechNotes D323x-S_D3243-S V1.2 Page 28 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 29: Lan Connector

    3.11 DVI-I Connector Pin 1 Pin Signal Pin Signal Data2+ Data2- Vcc (fused) Hot_Plug_detect Data0- DDC_CLK Data0+ DDC_DAT Data1- Data1+ CLK+ CLK- Masse Blue (DVI-I) Red (DVI-I) H-Sync (DVI-I) Green (DVI-I) TechNotes D323x-S_D3243-S V1.2 Page 29 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 30: Displayport V1.2 Connector

    DVI dongle detect / (GND (N/A)) (N/A)) AUX+ Hotplug detect AUX- P3V3P GND (Return) 3.13 Serial ATA Connectors Pin Signal Pin Signal Transmit data positive Transmit data negative Receive data negative Receive data positive TechNotes D323x-S_D3243-S V1.2 Page 30 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 31: Msata Pinout / Mini-Pcie Pinout [Updated]

    PERST# SATA TX+ / PCIe TX- PCIe TX- +3.3V / +3.3V STBY +3.3V STBY MSATA Present low SATA TX- / PCIe TX+ PCIe TX+ +3.3V / +3.3V standby +3.3V STBY standby TechNotes D323x-S_D3243-S V1.2 Page 31 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 32: Msata / Mini-Pcie Bios Setup Options [New]

    USB3.0 only, but no longer USB2.0 Mode switch for fullsize socket USB2.0 switch for fullsize socket Note: BIOS Setup option “WLAN” This option can be used to enable/disable Mini-PCIe WLAN modules of D3243-S. TechNotes D323x-S_D3243-S V1.2 Page 32 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 33: Fan Connectors

    Not connected Not connected Note: This feature is not supported by standard ATX power supplies! The power supply fan connector is shared with FAN4 connector on D3231-S/D3236-S (BIOS Setup option), they must not be used simultaneously! TechNotes D323x-S_D3243-S V1.2 Page 33 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards...
  • Page 34: Rear Audio / Frontpanel Audio Connector [Updated]

    Note: In case of using this connector in AC97 = Legacy mode (BIOS Setting) take care for pin 7. This pin is tied to GND. HP_ON# signaling on this pin is not supported. TechNotes D323x-S_D3243-S V1.2 Page 34 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 35  FrontOut mutes RearOut and MonoOut  RearOut mutes MonoOut (frontpanel system speaker) Remark: System beeps are only audible via the internal (frontpanel) system speaker. System beeps are also audible on the internal speaker if an external device is plugged in. TechNotes D323x-S_D3243-S V1.2 Page 35 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 36: S/Pdif Connector

    Interfaces & Connectors 3.19 S/PDIF Connector Pin 1 Pin Signal SPDIF out Note: Standard connector bracket should directly connect to SPDIF out and GND pins (no signal converter required) (Sample S/PDIF connector bracket) TechNotes D323x-S_D3243-S V1.2 Page 36 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 37: Gpio (Feature Connector)

    VCC_3.3V VCC_5Vaux reserved reserved VCC_5V VCC_12V VCC_12V Note: Current max. 1.5 A per power pin! (Connector location shown for D3231-S/D3236-S) GPIO access is provided via the SM-Bus controller PCA9554A Parameter Range ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/ -0.5V … 0.8V GPI/O Input Low Voltage D323x-S/Documentation/Specifiations/GPIO_Chip_PCA9554a.pdf 2V …...
  • Page 38: Power Supply Connector D323X-S (Multirail)

    + 5V (VCC) + 12V (P12VP) + 5V (VCC) + 12V (P12VP) + 3.3V (P3V3P) 3.22 Additional Power Supply Connector D323x-S (12V for Processor) Pin 3 Signal Pin Signal + 12V + 12V TechNotes D323x-S_D3243-S V1.2 Page 38 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 39: Power Supply Connectors D3243-S (Atx Multirail Or Single 12V Operation) [Updated]

    (4 pin 12V connector for CPU power) 24 pin ATX connector: * Pin 3 (GND) must be connected (= detection of ATX PSU) ** Pin 14 (-12V) and pin 20 (-5V) are not required for D3243-S TechNotes D323x-S_D3243-S V1.2 Page 39 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 40: D3243-S Single 12V Operation [Updated]

    For single 12V operation both connectors 24 pin and 4 pin are required! 24 pin ATX connector: * Pin 3, 8, 14, 16 (NC) must NOT be used in single 12V mode! TechNotes D323x-S_D3243-S V1.2 Page 40 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 41: D3243-S Single 12V Operation - Min / Max Config [New]

    Note: Each single pin of both connectors is capable of max. 8A! For processor ≥ 65W all pins of the 4-pin connector must be used due to peak current in Turbo Mode. TechNotes D323x-S_D3243-S V1.2 Page 41 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 42: Chassis Intrusion [Updated]

    BIOS POST if an intrusion event has been detected. In order to continue, the Supervisor Password must be entered to confirm the intrusion event. The intrusion status can be easily monitored by using the BMCAPI (Windows): ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D323x-S/IndustrialTools_D323x-S/BMC_Management-Controller-API/ TechNotes D323x-S_D3243-S V1.2 Page 42 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards...
  • Page 43: System Monitoring

    4 System Monitoring - Temperature Sensors and Fans - SystemGuard: Fan / Temperature Monitor - SilentFanConfig-Manager - Temperature Reference Points - BMC – BIOS Default Settings TechNotes D323x-S_D3243-S V1.2 Page 43 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 44: D3236-S / D3231-S: Temperature Sensors And Fan Connectors

    System Monitoring 4.1 D3236-S / D3231-S: Temperature Sensors and Fan Connectors 1) 3) Fan 4 (PWM) PSU Fan Control Sensor “Memory” Sensor “PCH” Processor (Fan1; PWM) 1) 2) Fan 3 (PWM or 3-pin) Sensor “Processor” Fan 2 (PWM) Sensor “CoreRegulator”...
  • Page 45: D3243-S: Temperature Sensors And Fan Connectors

     PWM or 3-Wire  Selectable via BIOS Setup Default = PWM) Note: Do not attach more than one fan per connector! Remove or connect fans only when unit is powered off! TechNotes D323x-S_D3243-S V1.2 Page 45 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 46: D323X-S / D3243-S: Systemguard

    User can configure fan aging control • (menu “Special”) User can configure system watchdog • (menu “Special”) User can adjust system behaviour via “Silent PC / Performance PC” slider by forced processor throttling TechNotes D323x-S_D3243-S V1.2 Page 46 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 47: D323X-S: Systemguard - Details

    1) Note: The temperature value shown for the processor (digital „PECI“ measurement =Platform Environment Control Interface) does NOT provide the absolute processor temperature, but it is a calculated value based on the relative PECI data. TechNotes D323x-S_D3243-S V1.2 Page 47 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 48: D3243-S: Systemguard - Details

    1) Note: The temperature value shown for the processor (digital „PECI“ measurement =Platform Environment Control Interface) does NOT provide the absolute processor temperature, but it is a calculated value based on the relative PECI data. TechNotes D323x-S_D3243-S V1.2 Page 48 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 49: Silentfanconfigmanager - Customize System Monitoring Settings

    4.6 SilentFanConfigManager – Customize System Monitoring Settings Windows-based System Management Configuration Tool ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D323x-S/IndustrialTools_D323x-S/SilentFanConfig-Manager/ 1. Windows-based configuration tool (SilentFanConfig) to create customized system monitoring settings like minimum fan speed and temperature sensor influence. These customized settings are stored in a specific “SMCO” flash file.
  • Page 50: Components For Continous 24/7 Operation @ +60°C

    Lo = endurance time @ 105°C Quartz with enhanced COM Driver with enhanced (e.g. 2.000hrs) operating temperature range Solid Electrolyte: operating temperature range to = 105°C tx = capacitor surface temperature Fluid Electrolyte: (e.g. 68°C) TechNotes D323x-S_D3243-S V1.2 Page 50 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 51: Capacitor Endurance Time Comparison

    System Monitoring 4.8 Capacitor Endurance Time Comparison TechNotes D323x-S_D3243-S V1.2 Page 51 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 52: Temperature Reference Points D323X-S

    60°C and 70°C may result in: - Higher self discharge rate - Decline of specified characteristics Reference Point Limit Temperatures (Component Surface) must not be exceeded! - Danger of leakage increases TechNotes D323x-S_D3243-S V1.2 Page 52 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 53: Temperature Reference Points D3243-S (Front)

    60°C and 70°C may result in: - Higher self discharge rate - Decline of specified characteristics - Danger of leakage increases Reference Point Limit Temperatures (Component Surface) must not be exceeded! TechNotes D323x-S_D3243-S V1.2 Page 53 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 54: Temperature Reference Points D3243X-S (Rear)

    TPM max. 70°C LAN i217 max. 75°C Super I/O max. 70°C DP Mux max. 85°C LVDS Converter max. 85°C COM Driver max. 70°C Reference Point Limit Temperatures (Component Surface) must not be exceeded! TechNotes D323x-S_D3243-S V1.2 Page 54 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 55: Bmc - Bios Default Settings D323X-S

    If the sensor temperature is below “StartUp” the fan rotates a its defined minimum fan speed Between “StartUp” and “FullSpeed” the fan speed increases linear If the sensor temperature achieves “Alert”, the system can provide a warning (e.g. via SystemGuard tool) TechNotes D323x-S_D3243-S V1.2 Page 55 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 56: Bmc - Bios Default Settings D3243-S

    If the sensor temperature is below “StartUp” the fan rotates a its defined minimum fan speed Between “StartUp” and “FullSpeed” the fan speed increases linear If the sensor temperature achieves “Alert”, the system can provide a warning (e.g. via SystemGuard tool) TechNotes D323x-S_D3243-S V1.2 Page 56 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 57: Power Supply

    USB devices; w/o PCIe cards, w/o SATA drives) The ATX power supply must support the minimum load conditions as mentioned in the left chart. Single 12V supply only supported by D3243-S! TechNotes D323x-S_D3243-S V1.2 Page 57 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 58: Display Options

    1 x DVI and 1 x HDMI o one VGA (analog)  D3243-S: Second DisplayPort can be used as DP or LVDS (via onboard DP2LVDS converter) D3235-S: Second DisplayPort not available  TechNotes D323x-S_D3243-S V1.2 Page 58 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 59: Vga Output

    Audio VGA via DVI-VGA converter max. recommended VGA screen resolution: 1920 x 1200 Note: Intel supports “VGA” up to 2048x1536 Analog (VGA) Monitor @75Hz, but signal quality may be limited! TechNotes D323x-S_D3243-S V1.2 Page 59 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 60: Dvi Output

    Display Options 6.4 DVI Output optional: Audio max. DVI screen resolution: 1920 x 1200 Digital (DVI) Monitor Note: DVI supports Single Link only! TechNotes D323x-S_D3243-S V1.2 Page 60 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 61: Hdmi Output

    DVI-HDMI Interface Connector HDMI max. HDMI screen resolution: 1920 x 1200 (Full HD) HDMI transfers Video & Audio Digital (HDMI) Monitor Note: HDMI Audio Device needs to be enabled via Control Panel! TechNotes D323x-S_D3243-S V1.2 Page 61 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 62: Displayport Output [Updated]

    Celeron and Pentium processors support DP resolutions up to 2560 x 1600 @ 60Hz (according DP1.1a). For resolutions up to 3840 x 2160 @ 60Hz (according to DP1.2) Core i3/i5/i7 processors are required TechNotes D323x-S_D3243-S V1.2 Page 62 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 63: Dual Digital Plus Vga Output (3 Displays)

    Analog (VGA) Monitor Digital (DVI or DP) Monitor DisplayPort- DVI-Converter Cable (optional) DP (or optional DVI via converter cable) Digital (DVI or DP) Monitor DP (or optional DVI via converter cable) TechNotes D323x-S_D3243-S V1.2 Page 63 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 64: Three Digital Outputs (3 Displays)

    Simultaneous use of internal graphics and PCIe graphics is possible. Digital (DVI) Monitor Digital (DP) Monitor DisplayPort- DVI-Converter Cable (optional) Digital (DVI or DP) Monitor DP (or optional DVI via converter cable) TechNotes D323x-S_D3243-S V1.2 Page 64 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 65: Lvds Display & Backlight Inverter (D3243-S)

    Display Options 6.9 LVDS Display & Backlight Inverter (D3243-S) Integrated Backlight, powered by Inverter Backlight Inverter TechNotes D323x-S_D3243-S V1.2 Page 65 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 66: Lvds Connector Details (D3243-S)

    LVDS_CLKH- (CLK_EVEN-) LVDS_CLK_L- (CLK_ODD-) Ground Ground DDC-Data DDC-Clock LCD-Power LCD-Power LCD-Power Ground LCD_Power_Enable Ground 1) selectable via Jumper Note: LVDS pinning is compatible to D2703-S / D2963-S / D3003-S / D3313-S TechNotes D323x-S_D3243-S V1.2 Page 66 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 67: Backlight Inverter Connector Details (D3243-S)

    If this control signal is used, the system integrator is responsible for the implementation of a backlight converter that fits to the control output voltage range. Backlight On/Off Control: Active High, 3.3V Note: Polarity can be changed via BIOS Setup TechNotes D323x-S_D3243-S V1.2 Page 67 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 68: Lvds Timing & Screen Resolution (D3243-S)

    Note: Option 10 (LVDS adjusted Parameters) becomes visible after running the “LVDS Tool” for implementing customized LVDS settings once. Important note: “Non-EDID Support” must be set to <Enabled> for standard LVDS displays w/o DDC (EDID) interface! TechNotes D323x-S_D3243-S V1.2 Page 68 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 69 Voltage Level / PWM Level 0.1V / 0.4% 4.1V / 100% The LVDS brightness level can be adjusted in BIOS Setup or via Windows 7 / Windows 8.1 Mobility Center (<Windows key> + <X>) TechNotes D323x-S_D3243-S V1.2 Page 69 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 70 For panels < 800 x 600 mode could be changed to <Text Mode> in order to enable full BIOS POST screen resp. full BIOS Setup screen (otherwise some portion of the screen may be cut off) TechNotes D323x-S_D3243-S V1.2 Page 70 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 71: Lvds Tool [Updated]

    Is required (see link below). (Sample screen message after running LVDS tool) Download-Link for LVDS Tool: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D3243-S/IndustrialTools_D3243/LVDS-Tool/  BIOS ≥ R1.20.0.SR2 and LVDS tool ≥ V2.2.1 must be used to implement customized LVDS settings Note: The onboard LVDS converter switches automatically between single channel and dual channel mode.
  • Page 72: Lvds - Influence On Graphics Output D3243-S [New]

    Do NOT touch / change these settings! BIOS Setup option to select Secure Boot: Disabled for MS Windows 7 (=default) Enabled for MS Windows 8.1 Additional BIOS Setup graphics option, available in Secure Boot mode only TechNotes D323x-S_D3243-S V1.2 Page 72 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 73 LVDS & DVI-D & DP BIOS Setup  BIOS Setup  BIOS Setup --- Win8.1  Win8.1  Win8.1  LVDS & DP & VGA BIOS Setup  BIOS Setup --- BIOS Setup  TechNotes D323x-S_D3243-S V1.2 Page 73 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 74: Lvds Cabling Reference

    AUO G150XG01V0 1024 x 768 Green-C&C GH001A-ROHS 17" AUO M170EG01-VD 1280 x 1024 Green-C&C GH053A-ROHS 19" Sharp LQ190E1LW01 1280 x 1024 Power Systems PS-DA0412-05 19" AUO M190EG01 1280 x 1024 GH053(A1)-ROHS ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D3243-S/Documentation/LVDS_Cabling-Samples/ TechNotes D323x-S_D3243-S V1.2 Page 74 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 75: Lvds Sample Cabling For Auo-G150

    Display Options 6.16 LVDS Sample Cabling for AuO-G150 TechNotes D323x-S_D3243-S V1.2 Page 75 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 76: Operating System Support

    7 Operating System Support - Windows® 7 - Windows® 8.1 - Linux TechNotes D323x-S_D3243-S V1.2 Page 76 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 77: Support For Windows 7 / Windows 8.1

    • Mainboards D323x-S and D3243-S are designed according to the Microsoft Guidelines for Windows 7 and Windows 8.1 MS certified drivers are available via OEM DU-DVD • and OEM FTP Server ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D323x-S/Drivers_D323x-S/ Note: D323x-S and D3243-S use the same “family drivers” TechNotes D323x-S_D3243-S V1.2 Page 77 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards...
  • Page 78: Linux Support [Updated]

     OpenSUSE 13.1 „flickering screen“ after installation; solved after update  Debian 7.2.0 Network driver issue  Debian kernel “too old” for LynxPoint system Note: Hints regarding usage of Watchdog, GPIO, LM-Sensors: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D323x-S/IndustrialTools_D323x-S/Linux_SystemMonitoring&Watchdog&GPIO/ TechNotes D323x-S_D3243-S V1.2 Page 78 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards...
  • Page 79: Mainboard Tools

    Note: Make sure to not use any DOS memory manager like himem.sys oder emm386! 8.1 BIOS Boot Logo Tool - Tool to integrate a customized boot logo ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Common-Mainboard-Tools/BootLogo_4_UEFI/ 8.2 EditCMOS - DOS-based production tool to change BIOS settings and freeze customized BIOS settings (= customized default settings) ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Common-Mainboard-Tools/EditCMOS_UEFI/ 8.3 OEMIDENT - Production tool to add MS OEM licence data (SLP1 / SLP2.x / OA3.0)
  • Page 80: Systemguard

    - Windows-based tool to monitor temperatures and fan speed of FTS mainboards - Option to configure automatic fan ageing supervision - Provides access to the System Watchdog ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Common-Mainboard-Tools/SystemGuard/ Note: SystemGuard V4.04 (or higher) recommended for D323x-S and D3243-S TechNotes D323x-S_D3243-S V1.2 Page 80 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards...
  • Page 81: Industrial Tools

    - Windows-based configuration tool to implement customized fan characteristics and temperature parameters. Includes DOS-based tool "SMCO" to flash the configuration file permanently into the system BIOS. ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D323x-S/IndustrialTools_D323x-S/SilentFanConfig-Manager/ 8.6 LVDS Tool - Tool to adjust LVDS-timings for mainboard D3243-S. Adjusted data are flashed into the system BIOS permanently.
  • Page 82: Windows System-Monitoring Api (Bmcapi)

    This API also provides access to the mainboard watchdog, the 8Bit GPIO interface and the intrusion feature of the mainboard. ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D323x-S/IndustrialTools_D323x-S/BMC_Management-Controller-API/ 8.8 Linux System-Monitoring Driver (“LM-Sensors”) - BMC-Management-Controller to access and adjust System Monitoring parameters like fan speed and temperatures.
  • Page 83: Known Issues & Important Notes

    0.05A – current PSUs may become instable with this low load). D323x-S and D3243-S provide some additional load (“dynamic load”) during power-on in order to facilitate the use of previous PSU models. TechNotes D323x-S_D3243-S V1.2 Page 83 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 84: Sata Interface (Intel Chipset Limitation)

    D3231-S and D3236-S provide an mSATA socket. Please note that one SATA channel (Port 2) and mSATA are shared and cannot be used simultaneously. By default, Port2 is enabled and mSATA disabled. Please select the required option in BIOS Setup accordingly.
  • Page 85 DMI link is shared by all highspeed busses in the system. Block diagram: High speed busses Q87/H81 system According to Intel, typically two USB3.0 ports can be used simultaneously (Max. 5Gb/s for each port) TechNotes D323x-S_D3243-S V1.2 Page 85 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 86 After installing a HR processor in mainboard D323x-S (BIOS < R1.21.0), it may happen that the PCIe x16 slot is corrupted (e.g. PCIe graphics card not working). This behaviour is based on an Intel firmware bug. There is a tool to reset affected mainboards: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Common-Mainboard-Tools/HaswellRefresh_PCIeX16/ Link to processor compatibility overview (provides overview about Haswell / Haswell Refresh processors): ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Compatibility_CPU_x_Board/Compatibility_CPUxBoard.pdf...
  • Page 87 9.10 PCI Slots D323x-S [New] Possible issue: PCI slot of D3231-S does not operate as expected  Please install BIOS ≥ R1.18.0 General note: D323x-S support 5V-only and 3.3V/5V universal PCI cards. Mainboard signal level is 3.3V (=5 V tolerant) 3.3V-only PCI cards can NOT be used (different mechanical connector layout)
  • Page 88 9.12 Intel iAMT / vPRO Manageability Support [New] Mainboards D3231-S, D3236-S and D3243-S featuring the iQ87 chipset provide full support for iAMT / vPro.  Appropriate Core i5 / Core i7 processors: Full iAMT / vPro feature set supported  Some Core i5 / some Core i7 / Core i3 / Pentium: Only “Standard Manageability” supported (e.g. no KVM) ...
  • Page 89 Default setting: “Never Off = disabled” Note: If “Never Off = enabled”, then Power Failure Recovery should be set to “Always On”! This Never Off-feature is only supported by mass production mainboards D3243-S! TechNotes D323x-S_D3243-S V1.2 Page 89 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 90 Off-Temperature (G3, S5/S4/S3): 23°C Note: If the system is never in G3 mode or if the S0 “working” temperature is lower than 70°C, this may result in much higher battery lifetime. TechNotes D323x-S_D3243-S V1.2 Page 90 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 91 Miscellaneous 10.3 Trusted Platform Module (TPM) [Updated] TPM V1.2 controller: Infineon SLB9635 (D3231-S/D3236-S) resp. Infineon SLB9660 (D3243-S) TPM Infineon TPM Jumper (D3231-S / D3236-S) (D3243-S: TPM located on rear side) Note: - TPM Jumper must be installed in order to enable the TPM hardware (installed = default)
  • Page 92 Note: All three watchdogs are physical identical, but they are handled from different application levels As the SystemGuard tool offers access to the watchdog it can be used as “WD software agent” to retrigger the watchdog during OS runtime TechNotes D323x-S_D3243-S V1.2 Page 92 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 93 No user interaction possible – POST Watchdog is always enabled! BIOS Boot Watchdog  o Set Watchdog in BIOS Setup 0 = WD disabled 1 – 255 = WD enabled (timeout = 1 – 255 minutes) TechNotes D323x-S_D3243-S V1.2 Page 93 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 94 For easy access to the watchdog functions, the Windows API (BMCAPI) or the related Linux driver (lm-sensors) can be used: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D323x-S/IndustrialTools_D323x-S/ o For easy testing, the SystemGuard tool provides access to the OS Watchdog. After enabling the Watchdog, SystemGuard retriggers the WD continuously.
  • Page 95 DosFlash.bat Copy unzipped files to a DOS-bootable USB stick, boot system from stick and run Note: In order to easily create a Free-DOS bootable stick, the Fujitsu BootStick tool can be used: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D323x-S/BIOS_D323x-S/BIOS_D3236-S/FTS_Basic-BootStick.$XE Note: Make sure not to use any DOS memory manager like himem.sys...
  • Page 96 Set BIOS Setup to Defaults (“Clear CMOS”): Power off system, set Jumper to “Recovery”, power on system and wait until picture appears on screen. Power off again and set jumper to previous position. CMOS settings should now be reset to default mode. (For this procedure no BIOS update/ USB stick is required!). TechNotes D323x-S_D3243-S V1.2 Page 96 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...
  • Page 97 10.8 BIOS integrated Erase Disk Tool All Industrial Mainboard include the BIOS tool “EraseDisk” for easy and secure deletion of any data on the harddisk Detailed information about Erase Disk is available here: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D323x-S/Documentation/PF_EraseDisk_e.pdf TechNotes D323x-S_D3243-S V1.2 Page 97 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards...
  • Page 98 TechNotes D307x-S V1.1 Copyright 2011 FUJITSU TechNotes D323x-S_D3243-S V1.2 Page 98 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards mainboards...

This manual is also suitable for:

D3243-sD3235-sD3236-s