Compressor Usage And Electrical Data - United Technologies Carrier 30RQM 160 Installation, Operation And Maintenance Instructions

4 - PHYSICAL AND ELECTRICAL DATA FOR 30RQM AND 30RQP UNITS
For the high pressure single- and dual-pump motors for 30RQM/30RQP 160-520 units (options 116S and 116W)
No. Description
(2)
Nominal efficiency at full load and nominal voltage
1 Nominal efficiency at 75% full load and nominal voltage
Nominal efficiency at 50% full load and nominal voltage
2 Efficiency level
3 Year of manufacture
Manufacturer's name or trademark, commercial registration
4
number and registered address
5 Product's model number
6 Number of motor poles
Nominal shaft power output at full load and nominal voltage
7-1
(400 V)
7-2 Maximum input power (400 V)
8 Nominal input frequency
9-1 Nominal voltage
9-2 Maximum current drawn (400 V)
10 Nominal speed
11 Product disassembly, recycling or disposal at end of life
Operating conditions for which the motor is specifically designed
I - Altitudes above sea level
II - Ambient air temperature
12
III - Maximum operating temperature
IV - Potentially explosive atmospheres
(1) Additional electrical data required by regulation No. 640/2009 concerning the application of directive 2005/32/EC on the eco-design requirements for electric motors.
(2) Item number imposed by regulation No. 640/2009, annex I2b.
(3) Description given by regulation No. 640/2009, annex I2b.
(4) Above 1000 m, a degradation of 3% for each 500 m should be taken into consideration.
(5) To obtain the maximum input power for a unit with hydraulic module, add the maximum unit input power from the electrical data table to the pump power input.
(6) To obtain the maximum unit operating current draw for a unit with hydraulic module add the maximum unit current draw from the electrical data table to the pump current
draw.

4.7 - Compressor usage and electrical data

Cp I Nom
00PSG001961100A 30
00PSG001748000A 37
I Nom Nominal current draw (A) at standardised Eurovent equivalent conditions (see definition of conditions under nominal unit current draw)
I Max Maximum operating current (A)
LRA Locked rotor current (A)
Cos phi Max @I Max, 400 V, 50 Hz
(3)
(5)
(6)
I Max I Max LRA Cosinus
Un Un-10 % Un Phi Max
41 44 215
50 54 260
Units
160 180 210 230 240 270 310 330 380 430
% 87,5 87,5 89,6 89,6 89,6 89,7 89,7 89,7 90,8 90,8 90,8 90,8
% 88,2 88,2 90,4 90,4 90,4 90,0 90,0 90,0 90,8 90,8 90,8 90,8
% 87,5 87,5 89,9 89,9 89,9 89,0 89,0 89,0 89,6 89,6 89,6 89,6
-
This information varies depending on the manufacturer and model
-
at the time of incorporation. Please refer to the motor nameplates.
-
-
- 2 2 2
kW 3 3 4
kW 3,81 3,81 4,96 4,96 4,96 6,80 6,80 6,80 6,80 9,16 9,16 9,16
Hz 50 50 50
V
A 6,81 6,81 8,27 8,27 8,27 11,30 11,30 11,30 11,30 15,30 15,30 15,30
r/s - r/min
Disassembly using standard tools. Disposal and recycling using an
-
m
°C
Please refer to the operating conditions given in this manual or in
°C
the specific conditions in the Carrier selection programs.
-
Circuit 160 180 210 230 240 270 310 330 380 430 470 520
A 1 - 2
0.89
B 2 2 2
A - 1
0.89
B - -
30RQM/30RQP
IE3
Same as above
Same as above
2 2 2 2 2 2
4 4 5,5 5,5 5,5 5,5
50 50 50 50 50 50
3 x 400
48 - 2900
appropriate company.
< 1000 (4)
< 40
Non ATEX environment
2 2 2 2 2
- - 3 - 4
- - - - - -
- 2 2 - 3 -
470 520
2 2 2
7,5 7,5 7,5
50 50 50
3 4 4 -
4 4 - -
- - - 4
- - 4 4
21