3 - DIMENSIONS AND CLEARANCES
3.3 - 30RQM/30RQP 380-520
WITHOUT HYDRAULIC MODULE
Sizes 430-470-520
WITH HYDRAULIC MODULE
Legend
All dimensions are given in mm.
B
Clearances required for maintenance and air flow
C
Clearance recommended for coil removal
Water inlet
Water outlet
Air outlet, do not obstruct
Control box
14
30RQP only
Power connection
NOTE:
Non-contractual drawings.
When designing a system, refer to the certified dimensional
drawings provided with the unit or available on request.
Please refer to the certified dimensional drawings for the
positioning of the fixing points, weight distribution points
and centre of gravity coordinates.