Advertisement
Quick Links
Large Corner TV Wall Mount
Instruction Manual
V1.0
V3.0
Model: PSCLF1
Thank you for choosing this Perlesmith product! At Perlesmith
we strive to provide you with the best quality products and
services in the industry. Please share your experience of our
product with others on www.perlesmith.com/pages/reviews if
you are satisfied. Should you have any issues, please don't
hesitate to contact us.
Technical Support:
1-800-556-6806 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/AU)
Web Site: www.perlesmith.com
Advertisement
Related Manuals for Perlesmith PSCLF1
Summary of Contents for Perlesmith PSCLF1
- Page 1 V1.0 V3.0 Model: PSCLF1 Thank you for choosing this Perlesmith product! At Perlesmith we strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others on www.perlesmith.com/pages/reviews if you are satisfied.
- Page 2 If your TV VESA is greater than 600x400 mm/23x16 in. or less than VESA 200x100mm/8x4in., this mount is NOT compatible. If this mount is NOT compatible, please contact customer service at supportus@perlesmith.com to find a compatible mount. Verify Your Wall Construction If you are are not sure the...
- Page 3 Product Support line at 1-800-556-6806 or customer service at supportus@perlesmith.com • Please note: Not all hardware included in this package will be used. Supplied Parts and Hardware for Step 1...
- Page 4 Bolts [Only one bolt size fits your TV] Note: The bolts are shown in accordance with the actual size [D1] [D2] M6 x 15mm M6 x 35mm [E1] [E2] [E3] M8 x 25mm M8 x 35mm M8 x 50mm Supplied Parts and Hardware for Step 2 Arm and Wall Plate Wall Plate Template Level...
- Page 5 Note: The lag screw is shown in accordance with the actual size Lag Screws M8x65mm Washers CAUTION! These anchors are for Wall concrete or brick walls Anchors ONLY. DO NOT use them in drywall or wood studs. Supplied Parts and Hardware for Step 3 Arm Extension Front Support Allen Key...
- Page 6 Note: If necessary, the spacers can be used in multi-layer. If the installation fails after trying various methods, please contact customer service at supportus@perlesmith.com. CAUTION: Ensure the TV brackets [04] are EQUALLY CENTERED on your TV AND securely fastened in place.
- Page 7 Option B (For Round Back TV) D2/E2/E3 C1/C2/C3 Alternate Spacer Setups Option C (For TV with A “Bump”) Spacers may be necessary for 2 holes ONLY. D2/E2/E3 D1/E1 C1/C2/C3 Alternate Spacer Setups...
- Page 8 Option D For cable interference or inset holes, use spacers to create extra space between the TV and TV brackets C1/C2/C3 D2/E2/E3 Alternate Spacer Setups Step 2 Attach the Arm and Wall Plate [01] to Wall For wood stud installation, follow STEP 2A For concrete installation, follow STEP 2B Step 2A Wood Stud Option...
- Page 9 2A-1 Please note: When using the PSCLF1 corner mounts. Find your stud locations, mark them and then lay the mount out on the floor configuring it to your stud locations before installing it. Making sure your TV will fit your desired location.
- Page 10 2A-4 HEAVY! You may need assistance with this step. Install the arm and wall plate using lag screws [A1] and washer [A2]. Tighten the lag screws [A1] only until the washers [A2] are pulled firmly against the wall plate. 1/2 in.(13mm) Socket Wrench (Not lncluded) Step 2B...
- Page 11 2B-2 Drill 6 pilot holes using a 3/8 in.(10mm) diameter drill bit. Make sure the depth is not less than 2 3/4 in.(70mm). Never drill into the mortar between blocks. 2 3/4 in.(70mm) ø3/8 in.(10mm) 2B-3 Use the hammer to knock anchors [A3] into the wall.
- Page 12 Step 3 Secure Front Support Assembly to the Arm and Wall Plate Remove the pre-assembed bolts [S] from the front support [02] and save them for the use in step 3-3. Allen Key 5/32 in. (4mm) Insert the arm extensions [03] into the front support [02] Fasten the bolts [S] removed from the front support [02] to secure the...
- Page 13 Step 4 Secure the TV with Brackets to the Front Support Assembly 4-1. Remove the preassembled bolts [S3] on the TV brackets [04] using screwdriver and keep them for the use in 4-3. 4-2. Hang the TV with TV brackets [04] to the front support assembly . HEAVY! You may need assistance with this step.
- Page 14 Adjustments 1. Loosen four tilt nuts [T] using socket wrench. 2. Adjust TV to your desired tilt angle. Tilt Adjustment 3. Retighten four tilt nuts [T] using socket wrench to fix the tilt angle. 3/8 in.( 10mm) Socket Wrench Level Adjustment 1.
- Page 15 Swivel Adjustment Middle Location Left Side Swivel Right Side Swivel...
- Page 16 Thank you again choosing this Perlesmith product! All of us at Perlesmith do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.