Operation; Control Functions; Lighting The Main Burners - Vermont Castings VC50 User Manual

O p e r a t i o n

Control Functions

Propane Tank Valve
WARNING : Never open the Tank Valve unless the Grill is being prepared for use, to prevent the pooling of
propane vapor.
Always open the Valve immediately before lighting the Grill, and always close it immediately after cooking has
been completed.
Burner Control Valves
On Model VC75, three valves independently control gas flow to the Left, Right, and Rotisserie burners, as
indicated on the front Control Panel (see Fig. 7).
On Model VC50 there are two independent control valves for the main burners.
The OFF position is indicated by the dot above each knob. A full range of flame adjustment is available from
High to Low, (by turning a knob counterclockwise).
Piezo Ignition System
As you turn the Ignitor knob clockwise, you will hear a click as the Piezo module generates an ignition spark
to the burners. The burner should light within four clicks.
Models VC200 & 400
BUTTON
Fig. 7
Page 6