Advertisement
Quick Links
VCS4006 / VCS4106 / VCS5006 / VCS5016 ASSEMBLY PROCEDURES
Tools Required: knife or scissors, Phillips or Robertson (square head) screwdriver..
Model VCS4106
Shown
Step 1: Unpack Carton and Verify Contents
Use a sharp cutting tool to cut the straps on the packaging and then lift off the carton top. The sleeve
surrounding the barbecue can be removed by lifting it straight up and over the top of the unit.
Compare
all contents to the parts list that accompanies this assembly manual.
Next,
remove the protective plastic
coverings from the metal parts
. Be careful not to scratch or damage the finish of the metal parts when
removing the protective plastic. Refer to the parts list for fastener detail.
Some parts may have sharp edges; to avoid injury, wearing gloves during assembly is
CAUTION:
strongly recommended
Page 1
50003825 01/06 Rev.0 En
Advertisement
Related Manuals for Vermont Castings VCS4006
Summary of Contents for Vermont Castings VCS4006
- Page 1 VCS4006 / VCS4106 / VCS5006 / VCS5016 ASSEMBLY PROCEDURES Tools Required: knife or scissors, Phillips or Robertson (square head) screwdriver.. Model VCS4106 Shown Step 1: Unpack Carton and Verify Contents Use a sharp cutting tool to cut the straps on the packaging and then lift off the carton top. The sleeve surrounding the barbecue can be removed by lifting it straight up and over the top of the unit.
- Page 2 VCS4006 / VCS4106 / VCS5006 / VCS5016 Assembly Step 2: Install the Casters Parts Required: (4) Casters, (1) Block (not included) Casters (wheels) may differ from those shown in Note: the illustration depending on the model you purchased. Select a side to begin installing the casters. Place a block...
- Page 3 VCS4006 / VCS4106 / VCS5006 / VCS5016 Assembly Step 4: Install the Side Shelf Supports Parts Required: (1) Left Side Shelf Support (1) Left Condiment Tray (1) Right Side Shelf Support Bolts (1) Right Condiment Tray Bolts (8) 1/4-20 x 1-1/2“ Bolts Only the right side assembly is shown in Fig.
- Page 4 VCS4006 / VCS4106 / VCS5006 / VCS5016 Assembly Step 6: Secure Shelves Fig. 6 Parts Required: (4) 10-24 x 1/2” Bolts (black) Secure each Shelf by inserting (2) 10-24 x 1/2” bolts through the U-Clip fasteners as shown in the diagram.
- Page 5 VCS4006 / VCS4106 / VCS5006 / VCS5016 Assembly Step 9: Attach Side Burner Lid (S/B-Single) Parts Required: (1) Side Burner Lid (S/B-Single) (2) #10-24 x 3/4” ( 1/4” Shank)* Included with the Side Burner Kit Bolts Attach the lid marked (S/B-Single) to the Shelf Right top marked VM-S/B using two #10-24 x 3/4”...
- Page 6 VCS4006 / VCS4106 / VCS5006 / VCS5016 Assembly Step 12: Attach the Handle to the Door VCS4006, VCS4106 Parts Required: Handle VCS4006/VCS4106: (1) Handle VCS5006/VCS5016: (3) Handles Handles may not appear exactly as shown in Note: diagram Attach the Door handle(s) to the door(s) by aligning the...
- Page 7 VCS4006 / VCS4106 / VCS5006 / VCS5016 Assembly Step 15: Install the Internal Components Parts Required: VCS4006, : (4) Sear Plates VCS4106 (3) Cooking Grates (1) Warming Rack VCS5006, : (5) Sear Plates VCS5016 (4) Cooking Grates (1) Warming Rack...
- Page 8 VCS4006 / VCS4106 / VCS5006 / VCS5016 Assembly Step 17: Install the LP Cylinder (LP Models Only) Parts Required: (1) LP Gas Cylinder (not included) Check your user’s manual for the cylinder filling Note: requirements, how to attach the regulator and how to test for leaks before you try lighting the grill.