Table of Contents
Advertisement
3.3.4
DLL Export Function
Device Support Function List:
PPCGetNumPorts
PPCSetPowerState
PPCGetPowerState
PPCGetPowerConsumption
PPCSetDCPowerState
PPCGetDCPowerState
PPCGetBoardID
PPCResetPSE
3.3.5
Unit32_tPPCGetNumPorts(void)
Description
Param[IN]
Return[OUT] The number of PoE Power Controllable Ports.
Since the bus order assigned by the operating system may be inconsistent with the
order of the PCIE slots on the actual motherboard, the software will reorder the ports
according to the board ID on the card from small to large.
If the boards ID are the same, the port order is sorted from small to large according
to the bus number assigned by the operating system.
3.3.6
Unit32_t PPCSetPowerState(uint32_t PortIndex,
PPC_POWER_STATE PowerState
Description
Param[IN]
Param[IN]
Return[OUT] Return value 1 means the operation completed
After call the API, the power state setting of the port will be stored in the EEPROM
on GigE vision frame grabber card. At next time you restart your computer, the
Advantech PoE Driver on system can automatically restore the power state to all
ports from EEPROM of GigE vision frame grabber card.
*[Note] On Windows10, Only PCIE-1181/82-AE supports this feature.
PCIE-1182 User Manual
PCIE-1181-AE
PCIE-1182-AE
Queries the Number of PoE Power Controllable Ports.
No.
If no any PoE Power Controllable Ports, the return value is 0.
If the return value is greater than (0xF000), please refer to the
error code definition.
Set the Power State of PoE Power Controllable Port.
PortIndex, start form 0.
PowerState, defined in PPC_POWER_STATE_LIST.
successfully
Others, please refer to the error code definition.
12
Advertisement
Table of Contents
