Table of Contents
Advertisement
2.3
Card Installation
Note!
We strongly recommend that you install the software driver before you
install the hardware in your system. This will guarantee a smooth and
trouble-free installation process.
Turn off your PC's power supply whenever you install or remove the
card or its cables. Static electricity can easily damage computer equip-
ment. Ground yourself by touching the chassis of the computer (metal)
before you touch any boards. See the static warning at the start of this
chapter.
1.
Turn off the computer and all peripheral devices (such as printers and monitors)
2.
Disconnect the power cord and any other cables from the back of the computer
Remove the PC's cover (refer to your user guide if necessary)
3.
4.
Install the card in your PCIe bus
Replace the PC's cover and reconnect any cables you removed at Step 3 and
5.
then connect the power connector and power supply with the power cable in the
package
6.
Turn on the computer
7.
Test your Ethernet port and verify that it works normally (see Chapter 4)
PCIE-1182 User Manual
8
Advertisement
Table of Contents
