Remote Login - dallmeier VideoNetBox Service

VideoNetBox, VideoNetBox Bank
The graphical configuration interface of the recorder is displayed.
Fig. 3-2 Configuration interface
 Make the required settings (see below).
3.2

Remote Login

After the start (up to about 5 minutes) the recorder is ready for remote configuration over
the network with the software NetConfig2.
 Start the NetConfig2 software.
The NetConfig Login dialogue is displayed.
Fig. 3-3 Login dialogue
 Set the required Mode.
 Enter the required IP address.
 Enter the required Password.
 Confirm with Login.
The connection to the recorder is established.
9
www.dallmeier.com