Installation (cont'd)
Leveler Adjustment
Position the case at the highest point. Set a long
magnetized level (4ft [1220 mm] or more) on
either underneath the deck or on top of the case.
Ensure to level case from front to back and side
to side.
Leg Adjustment
Adjust the legs at each corner of the case to
level out any discrepancies in order to optimize
case performance and proper drainage.
Level
(4 ft[1220mm])
Note: To avoid removing concrete flooring, begin
line up levelling from the Highest point of the
store floor.
A wrench or pliers may be used to adjust each
base leg.
•
Turning the base of each leg clockwise will
raise the height of the case.
•
Turning the base of each leg
counterclockwise will lower the height of the
case.
8
Level
(4 ft[1220mm])