Commands - ABB MegaFlex UL S1 Series User Manual

44/86

6.5 Commands

In this mode the keys perform the following functions:
Shows the main screen MEASURES.
See Section 6.2.
Shows the main screen EVENTS.
See Section 6.3.
Shows the main screen SETUP.
See Section 6.4.
Return to HOME screen.
Shows the operating status of the RPA PARALLEL SYSTEM.
See Section 6.6.
Key to reset general alarm and buzzer.
Shows the next screen Commands (2 or 3).
Shows the previous screen Commands (1 or 2).
MegaFlex 1000 to 1600
The COMMANDS mode is entered any time
the "COMMANDS" key is pressed.
Allows the user to execute UPS operation
commands.
UPS User Manual / REV-A
COMMANDS