Setup - ABB MegaFlex UL S1 Series User Manual

40/86

6.4 Setup

In this mode the keys perform the following functions:
Shows the main screen MEASURES.
See Section 6.2.
Shows the main screen EVENTS.
See Section 6.3.
Return to HOME screen.
Shows the main screen COMMANDS.
See Section 6.5.
Shows the operating status of the RPA PARALLEL SYSTEM.
See Section 6.6.
Key to reset general alarm and buzzer.
Shows the screen User.
Shows the screen Service Full.
Reserved for the ABB Service Center, at this level the parameters access is protected by a
"Service Code".
Shows the screen Service Full.
Reserved for the ABB Service Center, at this level the parameters access is protected by a
"Service Code".
MegaFlex 1000 to 1600
SETUP
The SETUP mode is entered any time the
"SETUP" key is pressed.
This screen allows the user to modify some
parameters permitting
functions of the UPS to his/her needs,
described as follows.
The LCD will display a series of screens
containing the user parameters, accessible
without password protection.
UPS User Manual / REV-A
to adapt some