Toro TX 1000 Operator's Manual page 6

Maintenance and Storage
•
Park the machine on a level surface, disengage the
auxiliary hydraulics, lower the attachment, engage the
parking brake (if equipped on your machine), shut off
the engine, and remove the key. Wait for all movement
to stop and allow the machine to cool before adjusting,
cleaning, storing, or repairing it.
•
Clean debris from the attachments, drives, mufflers, and
engine to help prevent fires. Wipe up any spilled oil or
fuel.
•
Allow the engine to cool before storing and do not store
near flames.
•
Never allow untrained personnel to service the machine.
•
Use jack stands to support the components when
required.
•
Carefully release pressure from components with stored
energy.
•
Keep your hands and feet away from the moving parts.
If possible, do not make adjustments with the engine
running.
•
Disconnect the battery before making any repairs; refer
to Using the Battery-Disconnect Switch (page
•
Charge the battery in an open, well-ventilated area,
away from spark and flames. Unplug the charger before
connecting or disconnecting it from the battery. Wear
protective clothing and use insulated tools.
•
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Protect your face,
eyes, and clothing when working with a battery.
•
Battery gases can explode. Keep cigarettes, sparks, and
flames away from the battery.
•
Keep all parts in good working condition and all hardware
tightened. Replace all worn or damaged decals.
•
If any maintenance or repair requires the loader arms to
be in the raised position, secure the arms in the raised
position with the hydraulic-cylinder lock(s).
•
Secure the loader-arm valve with the loader-valve lock (if
equipped on your machine) anytime you need to stop the
machine with the loader arms raised.
•
Keep all nuts and bolts tight. Keep the equipment in
good condition.
•
Never tamper with the safety devices.
•
Keep the machine free of grass, leaves, or other debris
buildup. Wipe up any spilled oil or fuel. Allow the
machine to cool before storing.
•
Use extra care when handling fuel; it is flammable and its
vapors are explosive.
– Use only an approved container.
– Never remove the fuel cap(s) or add fuel when the
engine is running. Allow the engine to cool before
refueling. Do not smoke.
– Never refuel the machine indoors.
– Never store the machine or fuel container inside
where there is an open flame, such as near a water
heater or furnace.
– Never fill a container while it is inside a vehicle, trunk,
pick-up bed, or any surface other than the ground.
– Keep the container nozzle in contact with the tank
during filling.
– Do not store fuel near flames or drain indoors.
•
Stop and inspect the equipment if you strike an object.
Make any necessary repairs before starting.
•
Use only genuine Toro replacement parts.
•
Keep your body and hands away from pinhole leaks
or nozzles that eject high-pressure hydraulic fluid. Use
cardboard or paper to find hydraulic leaks; never use
your hands. Hydraulic fluid escaping under pressure can
penetrate skin and cause injury requiring surgery within
a few hours by a qualified surgeon; otherwise, gangrene
may result.
35).
6