Toro TX 1000 Operator's Manual page 28

Removing the Side Screens
1. Open the hood and secure the hood prop.
2. Slide the side screens
slots in the front screen and frame.
Figure 37
Loader arms not shown for clarity
1. Side screen
Removing the Front Screen
1. Open the hood and secure the hood prop.
2. Loosen the 2 top bolts and 2 front bolts.
Figure 38
1. Bolt
3. Remove the screen.
(Figure 37) up and out of the
Removing the Front Cover
1. Remove the 2 upper bolts (3/8 x 1 inch), 2 washers, and
2 lower bolts (5/16 x 5/8 inch) from the front cover.
2. Remove the front cover.
g030720
1. Upper bolt—3/8 x 1 inch
(2)
2. Front cover
g031218
28
Figure 39
3. Washer (2)
4. Lower bolt—5/16 x 5/8
inch (2)
g204032