Toro TX 1000 Operator's Manual page 2

Compact tool carrier
Table of Contents

Advertisement

This product complies with all relevant European directives;
for details, please see the separate product specific Declaration
of Conformity (DOC) sheet.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
DANGER
There may be buried power, gas, and/or telephone
lines in the work area. Digging into them may
cause a shock or an explosion.
Have the property or work area marked for buried
lines and do not dig in marked areas. Contact your
local marking service or utility company to have the
property marked (for example, in the US, call 811 or
in Australia, call 1100 for the nationwide marking
service).
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on any
forest-covered, brush-covered, or grass-covered land unless
the engine is equipped with a spark arrester, as defined in
Section 4442, maintained in effective working order or the
engine is constructed, equipped, and maintained for the
prevention of fire.
The enclosed engine owner's manual is supplied for
information regarding the US Environmental Protection
Agency (EPA) and the California Emission Control
Regulation of emission systems, maintenance, and
warranty. Replacements may be ordered through the engine
manufacturer.
Introduction
This machine is a compact tool carrier intended to move
various earth and materials for landscaping and construction
work. It is designed to operate a wide variety of attachments
each of which perform a specialized function.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready.
Figure 1
model and serial numbers on the product. Write the numbers
in the space provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety-alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
2
identifies the location of the
Figure 1
(Figure
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g031207
2),
g000502

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2232722327g22327hd2232822328hd

Table of Contents