Toro TX 1000 Operator's Manual
Adjustable forks, compact tool carriers
Hide thumbs
Also See for TX 1000:
- Operator's manual (60 pages) ,
- Installation instructions manual (8 pages) ,
- Installation instructions (4 pages)
Related Manuals for Toro TX 1000
Summary of Contents for Toro TX 1000
- Page 1 Form No. 3430-855 Rev B Adjustable Forks TX 1000 Compact Tool Carriers Model No. 22341—Serial No. 404797000 and Up *3430-855* B Register at www.Toro.com. Original Instructions (EN)
-
Page 2: Table Of Contents
Figure 2 The adjustable forks attachment is a load-bearing 1. Safety-alert symbol attachment intended to be used on a Toro tool carrier. It is designed primarily for moving material such as This manual uses 2 words to highlight information. posts, rocks, trees, pallets, etc. Using this product... -
Page 3: Safety
Safety • Establish your own procedures and rules for operating on slopes. These procedures must include surveying the site to determine which General Safety slopes are safe for machine operation. Always use common sense and good judgment when Always follow all safety instructions to avoid serious performing this survey. -
Page 4: Maintenance And Storage Safety
Safety and Instructional • When lifting the attachment keep it level and prevent the load from spilling backward. Decals • Inspect the forks for damage after each use. Safety decals and instructions are easily visible to the operator and are Maintenance and Storage located near any area of potential Safety... -
Page 5: Setup
Setup Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. Adjustable-forks frame Fork Upper fork frame Assemble the forks. Bolt (3/8 x 1 inch) Locknut (3/8 inch) Assembling the Forks Parts needed for this procedure: Adjustable-forks frame Fork Upper fork frame... -
Page 6: Product Overview
Load rating capacity (per SAE 272 kg (600 lb) J1197) To ensure optimum performance and continued safety certification of the machine, use only genuine Toro replacement parts and accessories. Replacement g242374 parts and accessories made by other manufacturers Figure 5 could be dangerous, and such use could void the product warranty. -
Page 7: Operating Tips
Operating Tips Storage • To adjust the forks, slide them along the frame to Before long-term storage, wash the attachment the desired width. Adjust the forks to the widest with mild detergent and water to remove dirt and possible setting to ensure that the load is as stable grime. - Page 8 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.