Resetting Information To Zero; Stand-By-Mode - VDO Cyclecomputing Cytec C05+ Instruction Manual

6. Resetting information to zero

6. Resetting information to zero
The following information may be reset to zero with your VDO CYTEC C05+: The following information may be reset to zero with your VDO CYTEC C05+:
GB
DST = trip distance DST = trip distance
Watch out: Watch out: Both these information are simultaneously reset to zero Both these information are simultaneously reset to zero
To reset either DST or ATM, one of these informations has to be displayed. To reset either DST or ATM, one of these informations has to be displayed.
Resetting to zero is done by pressing the MODE button for five seconds straight. Resetting to zero is done by pressing the MODE button for five seconds straight.
Watch out: Watch out: When you have ODO or CLK in display and you press the MODE button for When you have ODO or CLK in display and you press the MODE button for
five seconds you are entering the wheelsize set-up mode or the clock set-up five seconds you are entering the wheelsize set-up mode or the clock set-up
mode. Make sure you have either DST or ATM in display before pressing the mode. Make sure you have either DST or ATM in display before pressing the
MODE button for five seconds. MODE button for five seconds.

7. Stand-by-mode

7. Stand-by-mode
Your computer VDO CYTEC C05+ features a stand-by-mode in order to save battery power. Your computer Your computer VDO CYTEC C05+ features a stand-by-mode in order to save battery power. Your computer
changes into stand-by-mode if it has not received any speed impulses for 5 min or no button has been changes into stand-by-mode if it has not received any speed impulses for 5 min or no button has been
pressed in the same period of time. The time of day (CLK) is still displayed in stand-by-mode, though. pressed in the same period of time. The time of day (CLK) is still displayed in stand-by-mode, though.
By pressing any button or just continuing your ride, this will end stand-by-mode and By pressing any button or just continuing your ride, this will end stand-by-mode and
return you to the appropriate mode. return you to the appropriate mode.
16
ATM = trip counter ATM = trip counter