Battery Change; Changing The Battery In The Computer Head; Troubleshooting - VDO Cyclecomputing Cytec C05+ Instruction Manual

8 . Battery change

Tip: Take down your total distance and wheelsize prior to battery change.

8.1 Changing the battery in the computer head

see chapter 1.4.

9. Troubleshooting

This chart outlines possible malfunctions, their causes and solutions.
malfunction
speed display
does not appear
display fades
or disappears
Watch out: old batteries require special disposal
possible cause
check for proper distance between
sensor and magnet
sender battery empty
computerhead is incorrectly twisted on
handlebar holder
no wheelsize entered
sender is too distant from computerhead mount sender closer to computerhead
battery in computer empty
temperatures below 5 C (40 F) dull
display readout
Hg
solutions
readjusting distance between sensor
and magnet
check battery power and
replace if necessary.
place computerhead on handlebar
holder and twist until detent (CLICK)
enter your wheelsize
check battery power and replace it if
necessary
back in normal temperatures, display
picks up working correctly
GB
17