Setting The Clock Clk - VDO Cyclecomputing Cytec C05+ Instruction Manual

5.4 Setting the clock CLK

5.4 Setting the clock CLK 5.4 Setting the clock CLK
Your VDO CYTEC C05+ features a clock with hour and minute display Your VDO CYTEC C05+ features a clock with hour and minute display Your VDO CYTEC C05+ features a clock with hour and minute display
in 24 h mode To access the clock set-up mode proceed as follows: in 24 h mode To access the clock set-up mode proceed as follows: in 24 h mode To access the clock set-up mode proceed as follows:
Step 1: call in the CLK information into your display Step 1: call in the CLK information into your display Step 1: call in the CLK information into your display
Step 2: Press the MODE button for 5 sec. Step 2: Press the MODE button for 5 sec. Step 2: Press the MODE button for 5 sec.
The set-up mode for the clock starts. The set-up mode for the clock starts. The set-up mode for the clock starts.
You will see the digit flashing and changing You will see the digit flashing and changing You will see the digit flashing and changing
its value (14...15...16). its value (14...15...16). its value (14...15...16).
Step 3: Once the correcthour figure is Step 3: Once the correcthour figure is Step 3: Once the correcthour figure is
flashing (i.e. 15), press the MODE flashing (i.e. 15), press the MODE flashing (i.e. 15), press the MODE
button, then the minute figure is flashing button, then the minute figure is flashing button, then the minute figure is flashing
and changing its value. and changing its value. and changing its value.
Step 4: Once the correct minute value is Step 4: Once the correct minute value is Step 4: Once the correct minute value is
flashing, press the MODE button, the computer flashing, press the MODE button, the computer flashing, press the MODE button, the computer
will then return to regular display mode. will then return to regular display mode. will then return to regular display mode.
Watch out! Watch out! Watch out! The time (CLK) has to be reentered after a battery change The time (CLK) has to be reentered after a battery change The time (CLK) has to be reentered after a battery change
Press 5sec.
to start
Press to Stop
switch to next
Press to Stop
and quit
GB
15