Table of Contents
Advertisement
Configuration: Encoder > Audio
The encoder video and audio configurations for an SDI (Serial Digital Interface) equipped
appliance are only available on a model ending in part number –xxx1/–xxx2 (see Status: User
Information for part number). These parameters are used to set the SDI Encoder Audio
Input settings. For SDI equipped units, everything is the same as for the models ending in
-xxx1/-xxx2, except for the fields below.
SDI Audio Input
Audio Gain
Configuration: Decoder
The SDI decoder does not display any additional fields in IWS. If an SDI board is present,
connecting to the output will produce SDI out of the appliance including Composite, S-
Video, SDI, and Audio (analog and SDI). When a VBrick encoder is optioned with SDI video
input with PIP enabled the video that will be displayed in the PIP screen will originate only
from the standard NTSC video inputs and not from the SDI input.
VBrick MPEG-2 Appliance Admin Guide
Input can be through 1/8" mini-phono jack, from AudioMate, or
from within the SDI data using SDI 1-2 or SDI 3-4.
If SDI 1-2 or SDI 3-4 is chosen as the audio input, the audio gain
settings have no effect.
SDI Configuration
59
Advertisement
Table of Contents
