Configuration: Encoder > Destination 1/Destination2 - VBrick Systems VB4000 Admin Manual

Audio Channels
Configuration: Encoder > Destination 1/Destination2
Transmit Enable
VBrick MPEG-2 Appliance Admin Guide
Model dependent. (If the EEPROM Revision is 2 or higher, changing
the Audio Channel setting affects the Sample Frequency. )
• If the model number ends in –xxx0, the parameter can be set to
Stereo, Mono and Dual. The default setting is Stereo.
• If the model number ends in –xxx1/-xxx2, the settings are
dependent on the PLX EEProm revision Number:
• If the EEProm Revision is 1, this parameter can be set to Stereo
and Mute. The default setting is Stereo.
• If the EEProm Revision is 2 or higher, the parameter can be set to
Stereo, Mono (left to stereo) or Mute. Default = Stereo.
Stereo – Stereo directs the input left channel to the left channel in
the audio stream and the input right channel to the right channel in
the audio stream.
Mono (left to stereo) – Mono directs the left input channel to both
the left and right channel.
Mono (left only) – This option allows only the left input channel
to be carried in the stream. Output is to the left channel only.
Controls whether the primary encoder output is to be transmitted to
the network.
MPEG-2 Configuration
31