Cylinder And Piston - Husqvarna 545 Mark II Workshop Manual

20. Attach the cylinder cover.
8.17.3 Product overview of the generator cables

8.18 Cylinder and piston

8.18.1 To disassemble the cylinder and piston
1. Remove the cylinder cover.
2. Remove the spark plug cap.
3. Remove the carburetor.
4. Remove the muffler and heat deflector.
722 - 003 - 26.03.2019
5. Remove the 4 screws and lift the cylinder. Remove
the sleeves for the 4 screws.
CAUTION: Make sure that the piston does
not move. The guide pin can cause damage
to the piston if it falls.
6. Remove the cylinder base gasket.
CAUTION: Make sure that no dirt or
unwanted particles go into the crankcase.
7. Put a cover on the crankcase opening.
Repair instructions - 57