10. Attach the 2 screws to the handle.
11. Tighten the screw in the vibration damping unit.
Attach the screw. Tighten the 2 screws to the correct
Servicing data on page 9 .
torque. Refer to
A
12. Tighten the screw in the vibration damping unit.
Attach the chain catcher. Tighten the 2 screws to the
correct torque. Refer to
56 - Repair instructions
Servicing data on page 9 .
13. Attach the wires as the illustration shows.
14. Attach the handle cover (B. Tighten the 2 screws (A)
to the correct torque. Refer to
page 9 .
B
15. Attach the air filter holder and the carburetor. Refer
To assemble the carburetor on page 46 .
to
16. Attach the air filter.
17. Attach the guide bar and the saw chain. Refer to the
operator's manual.
18. Attach the chain brake system.
19. Attach the spark plug and the spark plug cable.
Servicing data on
A
722 - 003 - 26.03.2019