Husqvarna 545 Mark II Workshop Manual page 48

9. Loosen the screw in the vibration damping system.
10. Remove the two screws as the illustration shows.
11. Remove the two screws as the illustration shows.
12. Remove the handle from the product.
48 - Repair instructions
13. Remove the screw (A) to get access to the screw of
the vibration damping system. Loosen the screw of
the vibration damping system.
A
14. Loosen the deflection limiter.
15. Pull the throttle wire through the carburetor bottom
plate.
722 - 003 - 26.03.2019