Husqvarna 545 Mark II Workshop Manual page 38

7. Put the centrifugal clutch in a vise. Carefully remove
the clutch shoe springs. Remove the clutch shoe
springs from the side that does not have text.
CAUTION: Do not open the clutch spring
too much as this causes damage to the
product.
38 - Repair instructions
8.12.2 To clean and examine the centrifugal clutch
1. Clean and examine the C-spring (A), the clutch hub
(B), the clutch shoes (C) carefully. Replace
damaged parts. Always use the original spare parts.
2. Measure the diameter of the clutch shoes across the
full clutch hub. Replace the clutch if the thickness is
less than 65 mm.
A
B
C
722 - 003 - 26.03.2019