Dismantling The Piston And Cylinder - Husqvarna T525 Workshop Manual

Repair instructions

7.24 Dismantling the piston and cylinder

1
Dismantle the following:
• Air filter cover and air filter
• Carburetor
• Starter assembly
• Clutch cover
• Cylinder cover
• Muffler
• Engine case cover
• Front Handle
• Handle
• Rear and bottom anitvibration elements
• Spark plug
See Figure 65.
2
Remove the two screws and remove the ignition
module. See Figure 66.
3
Insert the piston stop 575 29 36-01. Use a 13 mm
socket spanner to remove the clutch. See Figure
67.
48
– English
Fig 65
Fig 66
Fig 67