Heated Handles - Husqvarna 545 Mark II Workshop Manual

8.7 Heated handles

8.7.1 To disassemble and assemble the front
heated handle
1. Remove the screws (A) and the heated handle cover
(B).
B
2. Remove the switch (C) from the contact plate (D).
Disconnect the wire (E) from the contact plate.
Disconnect the handle wire (F) from the contact
plate. Remove the contact plate (D). Disconnect the
stator wire (G) and the carburetor wire (H) from the
wire (I). Disconnect the earth cable (J) from the
handle.
I
G
J
24 - Repair instructions
A
E
D
C
F
H
3. Remove the 2 screws (K).
4. Remove the 2 screws.
K
722 - 003 - 26.03.2019