Husqvarna 545 Mark II Workshop Manual page 20

3. Attach the chain guide (L) and the screw (K). Attach
the O-ring (J), the washer (H), the worm screw (G),
the worm wheel (F), the chain tensioner (E) and the
screw (D).
D
E
J
K
L
4. Lubricate the recess for the chain brake spring (Q)
with grease.
20 - Repair instructions
5. Put the clutch cover in a vise. Compress the chain
F
G
H
6. Attach the cover (B) over the chain brake spring (C).
Q
brake spring with a wide screwdriver and push it
down with your thumb.
WARNING: Use protective goggles. The
chain brake spring can eject and cause
injury.
Tighten the screws (A) to the correct torque. Refer to
Servicing data on page 9 .
A
B
C
722 - 003 - 26.03.2019