Heated Handles - Husqvarna 565 Operator's Manual

These reduce the flow of cooling air and prevent large
amounts of snow from being sucked into the carburettor
space.
IMPORTANT! If the temperature rises above -5°C or
0°C respectively, the starter housing cover MUST be
removed. Otherwise there is a risk of overheating,
resulting in severe damage to the engine.

Heated handles

572XPG
On models with the model code XPG both the front
handle bar and the rear handle are equipped with
electrical heating. These are supplied with electricity from
a generator built into the chain saw.
When the switch is pushed upwards, the heat is switched
on. When the switch is pushed downwards, the heat is
switched off.
Electrical carburettor heating
572XPG
On models with the designation XPG there is an
electrically heated carburettor. Electrically powered
heating prevents ice formation in the carburettor. A
thermostat regulates the heating so that the carburettor
always has the right working temperature.
MAINTENANCE
–
English 37