Switching Between Pm2.5/Odor&Tvoc/Timer Monitor Display; Stopping Operation Using Off-Timer - Hitachi EP-PF120J Instruction Manual

Useful Features
Switching Between PM2.5/Odor&TVOC/Timer Monitor Display
 Although the monitor normally displays the amount of PM2.5, you can check the Odor&TVOC level or the
remaining time of the set timer.
 The PM2.5 and Odor&TVOC values are guidelines.
Touch
Each touch of the button changes the following monitor display.
3
PM2.5 (µg/m )
Monitor Display
Displays the amount of PM2.5 measured by the sensor in units of µg/m
Value
PM2.5 Dirtiness Level :
* It does not operate with the clean monitor and automatic
operation.
Displays the strength of the odor and TVOC measured by the
sensor from 0 to 100.
Odor&TVOC
Value
Odor strength : Strong  ......  Faint
Timer Displays the remaining time of the timer.
* The Monitor display switches to PM2.5 automatically one minute after displaying the Odor&TVOC or timer.

Stopping Operation Using Off-timer

 Set the off-timer to automatically stop the unit after the set operation time.
Touch
At each touch the following display will appear on the Monitor display for setting.
2h 4h
Monitor Display
Automatically stops after the set operation time.
Timer
The indicator lights up while the timer is set.
* The Monitor display switches to PM2.5 automatically one minute after setting the timer.
E-20
EP-PF120J_EN.indd 20 EP-PF120J_EN.indd 20
to switch display.
Odor&TVOC Timer
Display Contents Of Monitor
Display Contents
: 75 or more  ...... 
 ...... Clean
Dirty
: 100  ...... 
to set the timer.
6h 8h Off
Display Contents Of Monitor
Display Contents
(Continued)
3
.
0
0
(When the off-timer is set to 4hr)
Example
3
(when the value is 50 µg/m )
(when the value is 80)
Example
2/11/2019 3:36:26 PM 2/11/2019 3:36:26 PM