Operation; Starting Operation; Switching Airfl Ow Rate - Hitachi EP-PF120J Instruction Manual

Operation

Starting Operation

Securely insert the power plug to the outlet
1
2
Touch the
Operation will start, and indicator
will light up.
Touching the
while the unit is operating will
dim the indicator and stop the
operation of the unit.
 "Auto" mode is set as a factory default.
 From the second use onward, the memory function enables operation based on the saved status.
Switching Airfl ow Rate
 Each time the
"Silent"
EP-PF120J_EN.indd 17 EP-PF120J_EN.indd 17
power button
power button
Power button
button is touched while the unit is operating, the airfl ow rate switches in the following order.
"Medium"
After all indicators have light up at once,
"Auto" will light up.
For the first 3 minutes, the unit will
check and store the condition of the
room air.
During that time, the clean monitor
lights up in white.
This operation is performed every time
you touch the power button to start
operation.
Clean monitor
Airflow
"High"
(P.E-24)
"Silent" ...
2/11/2019 3:36:25 PM 2/11/2019 3:36:25 PM
E-17