CTC Union ITP-G800SM-8PH24 Quick Installation Manual

CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60, Zhouzi St., Neihu District, Taipei 114
Taiwan
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
© 2015 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
ITP-G800M/G802SM-8PH(E)24 Series are managed industrial grade
Gigabit Ethernet PoE+ switches with 8 x 10/100/1000Base-T Gigabit
Ethernet PoE ports plus 2 x 100/1000Base-X SFP Fiber (For ITP-G802SM
Series). ITP-G800M/G802SM-8PH(E)24 switches equipped with PoE (Power
over Ethernet) function utilize M12 connectors to ensure tight and robust
connections and to guarantee reliable operation against environmental
disturbances such as vibration and shock.
Housed in IP67 grade rugged and wall mountable housing, ITP-
G800M/G802SM-8PH(E)24 switches are able to protect against dust and
water submersion. Besides, these switches comply with EN50155 standard
that covers strict demands on operating temperature, power input voltage,
surge, ESD, vibration, and shock, thus making them suitable for industrial
applications such as vehicle, rolling stock and railway.
Packing List
 ITP-G800M-8PH(E)24 or G802SM-8PH(E)24 Device
 Protective caps for M12 Gigabit Ethernet, console, and alarm ports.
 2 Sets of Fiber Cable Gland for SFP ports (ITP-G802SM Series only)
 Console cable (M12 to DB9)
 CD-ROM (Manual, SmartConfig, MIB file)
 Quick Installation Guide
Features
 Use M12 & M23 anti-vibration and shock connector
 24/48VDC redundant dual input power and built-in power booster
design up to 55VDC for PoE output
 Regulate PoE output voltage (55VDC) to stabilize PoE device and
guarantee delivery PoE power distance to 100meter
 PoE output power budget maximum 180W
 Wide temperature range -40°C~75°C ("-E" models only)
 IP67 grade rugged housing against water, dust and oil
 Support many advanced Ethernet L2 functions
 CE, FCC, EN50155 and EN50121-4 certified
 Industrial grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
Specifications
Interface
 Port 1~8 support 10/100/1000Base-T M12 (8-Pin, A-Code Female)
Port 9~10 fiber cable glands support 100/1000Base-X SFP slot with DDMI
(ITP-G802SM Series only)
 Support Auto MDI/MDI-X
 Support 802.3x Flow Control
 Full/Half Duplex
 Store & Forward Mode
Switch
 MAC Address Table: 8K
 Packet Buffer Size: 256K Bytes
 Jumbo Frame: 9.6KB
 Switching Fabric: 16Gbps (ITP-G800M Series) , 20Gbps (ITP-G802SM
Series)
www.ctcu.com
- 1 -
Quick Installation Guide
ITP-G800SM-8PH24/ITP-G800M-8PHE24
EN50155 IP67 Managed 8 x 10/100/1000Base-TX with 8 PoE+ Ethernet
Switch (-10°C~60°C/-40°C~75°C)
ITP-G802SM-8PH24/ITP-G802SM-8PHE24
EN50155 IP67 Managed 8 x 10/100/1000Base-TX + 2 x 100/1000Base-X
SFP with 8 PoE+ Ethernet Switch (-10°C~60°C/-40°C~75°C)
sales@ctcu.com
Specifications (cont.)
Power over Ethernet
 8 x PoE enabled ports, M12 (8-Pin) A-Code Female
 End-Span Alternative A Mode
 Supports IEEE802.3af 15.4watts PoE per port
 Supports IEEE802.3at 30watts PoE+ per port (180W budget)
 Pin Assignments: 4, 6 (Positive Pins); 5, 7 (Negative Pins);
1, 2, 3, 4, 5, 6, 7, 8 (Data)
Power
 Connector Type: 1 x M23 (5-Pin) Male
 Power Supply: Redundant Dual DC 24/48V (20~57VDC) input power
 Reverse Polarity Protection: Yes
 Overload Current Protection: Yes
 Consumption:
Input Total Power
Model
Voltage Consumption
ITP-G800M- 24VDC 197.6W
8PH(E)24
48VDC 198.3W
ITP-G802SM- 24VDC 198.5W
8PH(E)24 48VDC 199.2W
Mechanical
 Housing: IP67 Waterproof Protection
 Fanless Design
 Dimensions: 70 mm (D) x 240 mm (W) x 168 mm (H)
 Mounting: Wall mounting, DIN-Rail mounting (Optional Accessory)
 Weight: 2.055kg (ITP-G800M Series), 2.17kg (ITP-G802SM Series)
Environmental
 Operating Temperature:
 -10°C~60°C (ITP-G800M-8PH24, ITP-G802SM-8PH24)
 -40°C~75°C (ITP-G800M-8PHE24, ITP-G802SM-8PHE24)
 Storage Temperature: -40°C~85°C
 Humidity: 5%~95% (Non-condensing)
Certifications
 EMC: CE
 EMI (Electromagnetic Interference): FCC Part 15 Subpart B Class A, CE
EN55022 Class A
 Railway Traffic: EN50155, EN50121-4
 Immunity for Heavy Industrial Environment: EN61000-6-2
 Emission for Heavy Industrial Environment: EN61000-6-4
 EMS (Electromagnetic Susceptibility) Protection Level:
 EN61000-4-2 (ESD) Level 3, Criteria B
 EN61000-4-3 (RS) Level 3, Criteria A
 EN61000-4-4 (Burst) Level 3, Criteria A
 EN61000-4-5 (Surge) Level 3, Criteria B
 EN61000-4-6 (CS) Level 3, Criteria A
 EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
 Shock: IEC 61373
 Freefall: IEC 60068-2-32
 Vibration: IEC 61373

MTBF (MIL-HDBK-217): 197,455 (ITP-G800M Series); 184,205 Hours (ITP-
G802SM Series)
Device Power PoE Boost
Consumption Budget Efficiency
8.9W 180W 95.30%
10.6W 180W 95.80%
9.8W 180W 95.30%
11.5W 180W 95.80%
- 2 - V1.0