Rear Panel Of Eonnas Pro 500 / 800 - Infortrend EonNAS Pro 500 Series Hardware Manual

1.3 Rear panel of EonNAS Pro 500 / 800

There are
components on the back of EonNAS
Pro 500 / 800. From top to bottom,
there is the power socket (1), eSATA
port (2), USB ports (3), Ethernet port
1 (4), Ethernet port 2 (5), restore
default button (6), VGA port (7) and
Kensington lock-hole (8).
No. Item
1. Power socket
2. eSATA port
3. USB ports
Ethernet port
4.
1
Ethernet port
5.
2
Restore
6.
default button
7. VGA port
Kensington
8.
lock-hole
EonNAS Pro 500 / 800 Hardware Manual
no user serviceable
The power socket is for power cable connection.
The eSATA port is for external expansion purposes (intended for
high speed external hard disk drive storage expansion).
The USB ports are for external expansion purposes (CD, DVD,
USB flash drives, printers, etc.); or to supply power to external
eSATA devices.
Ethernet port 1 is for accessing and configuring EonNAS.
Ethernet port 2 is for accessing and configuring EonNAS.
The restore default button is for restoring the system to its initial
manufacturing settings (TCP / IP, system settings, etc.).
Reserved.
For use with a Kensington lock. Please refer to your Kensington
lock for instructions.
Description
12