Advertisement
Quick Links
Installation lnstructions
V1.0
PSCLF1
Thank you for choosing our product! We strive to provide the best
quality and services for our customers. Would you kindly share
your experience on Amazon if you are satisfied? Should you have
any issues, please don't hesitate to contact us.
Telephone：
1-800-556-6806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：
supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/AU)
Advertisement
Related Manuals for Perlesmith PSCLF1
Summary of Contents for Perlesmith PSCLF1
- Page 1 Installation lnstructions V1.0 PSCLF1 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us.
- Page 2 Note: To keep your TV from colliding with the walls, please note the individual maximum width of the TV for the three different adjustment methods of the TV wall mount. Max:1000mm/39 in. Max:1320mm/52 in. Max:1530mm/60 in.
-
Page 3: Important Safety Information
We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product. •DO NOT INSTALL INTO DRYWALL ALONE. •Please check www.perlesmith.com for more products and company information. Tools Needed (Not lncluded) Stud Finder... -
Page 4: Supplied Hardware
Supplied Hardware Hardware for Attaching TV Brackets to TV Spacers Washers [If necessary] M6/M8 x4 2.5mm X8 10mm X4 22mm X4 TV Screws [Only one size fits your TV] M6 x 15mm x4 M6 x 35mm x4 M8 x 50mm x4 M8 x 25mm x4 M8 x 35mm x4 Hardware for Attaching the Arm Assembly/Wall Plate to Wall... - Page 5 Step 1 Check TV Hole Pattern and Select TV Screws 100 mm ≈ 4 in. 200 mm ≈ 7 7/8 in. 300 mm ≈ 11 3/4 in. 400 mm ≈ 15 3/4 in. 600 mm ≈ 23 6/10 in. Only one screw size fits your TV. Step 2 Select Spacers (if needed) NO SPACER...
- Page 6 Too Short Too Long Step 3 Secure the TV Brackets to Your TV No Spacer With Spacer Alternate Spacer Setups Step 4 Attach the Arm Assembly/Wall Plate [01] to Wall For wood stud installation, follow STEP 4A For concrete installation, follow STEP 4B Step 4A Wood Stud Option WARNING:...
- Page 7 4A-1 Use a stud finder(not included) to locate wood studs. Mark the edge and center locations.(The distance to assemble is 525mm/20.6 in.) 4A-2 Position the arm template [05] at your desired height and line up the holes with your stud center line. Level the wall plate and mark the holes.
- Page 8 4A-4 Install the arm assembly/wall plate using lag bolts [A1] and washer [A2]. Tighten the lag bolts [A1] only until the washers [A2] are pulled firmly against the wall plate. 13mm A1 A2 Socket Wrench (Not included) Solid Concrete or Concrete Block Option Step 4B WARNING: ●Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts...
- Page 9 4B-2 Drill 6 pilot holes using a 10mm diameter drill bit. Make sure the depth is not less than 70mm. Never drill into the mortar between blocks. 70mm ø10mm 4B-3 Use the hammer to knock anchors [A3] into the wall. Be sure the anchors [A3] are seated flush with the concrete surface.
- Page 10 Step 5 Install arm extensions [02] and fasten with screws [S4] x4 Remove the pre-assembed screws [S4] from the front support [02] and save them for the use of step 5-3. Wrench 4mm Insert the arm extensions [03] into the [02] Fasten the screws [S4] x4 removed from the front support [02].
- Page 11 Hang TV with brackets [04] onto the arm extensions [02] Step 6 and [03] Step 7 Secure TV with brackets [04] against the arm extensions [02] and [03] with the pre-assembled screws [S3]...
- Page 12 Adjustments 1. Loosen both tilt screws[T]. Tilt Adjustments 2. Adjust TV to your desired tilt angle. 3. Retighten both tilt screws[T] to fix the tilt angle. 10mm Wrench Level Adjustment 1. Loosen the two screws [S1] on the rear of the arm plate. 2.