Tc1 Setup Menu - Process Technology Lufran LUF Series Manual

Engineering Information (Continued):
Operator Interface Panel (OIP) (Continued):

TC1 Setup Menu:

This menu displays the various settings for the temperature control module. This module controls the
switching of the solid state relays.
TC1 Setup Information
Panel
IN TYPE
OFFSET
AL2 MOD
AL2 HI
AL2 LOW
O1 TYPE
O2 TYPE
CTL PERIOD
SAVE
READ
MAIN
ALARMS
ADAM
SLC
BACK
M-43-25
Revision - Date 03-01-04-18
Figure 15: TC1 Setup Menu
This field identifies the sensor input type. This is a factory setting
which should not be changed.
Sensor offset value. The range is -10 to +10.
Press the offset button to bring up a keypad to change its value.
Alarm 2 function. Value 6= absolute upper limit alarm. This is a
factory setting which should not be changed.
Alarm high limit value.
OVERTEMP alarm.
Alarm low limit value. (Not used)
Output 1 type. Value 00 = heating. This is a factory setting which
should not be changed.
Output 2 type. Value 02 = Alarm. This is a factory setting which
should not be changed.
Displays the control time period. The range for this setting is 1-30
seconds. This is a factory setting which should not be changed.
Saves changes made to a TC1 value.
Reads the stored value from the TC1 module's memory.
This button will display the MAIN MENU screen.
This button will display the ALARMS MENU screen.
This button will display the ADAM SETUP MENU screen.
This button will display the SLC SETUP MENU screen.
This button will return to the previous screen.
25
Description
This setting triggers the PROCESS
LUF-Series Lufran Manual
Standard outlet, Standard Interface