Related Documents; Introduction - Process Technology Lufran LUF Series Manual

Related Documents:

The following documents are to be used in conjunction with this manual:
→
ANSI/NFPA70 – National Electric Code , latest edition. To be used to determine appropriate electrical
service, wire sizing, routing and protection.
SEMI S2 – Semiconductor Equipment Safety Guidelines, latest edition. To be used in conjunction with
safe operation, access and decommissioning procedures.
ANY – State or local building codes that would cover the electrical, mechanical, or physical installation of
electrical heating equipment.
→
National Electric Code
NFPA 1999 Copyright
National Fire Protection Association
Quincy, Mass. 02269

Introduction:

TM
The LUF-series Lufran fluoropolymer inline water heater is designed to heat DI water with very stringent
cleanliness requirements. All wetted surfaces in this unit are fluoropolymer and PVDF material. There
are no metallic wetted surfaces. The cleanliness of these units has been confirmed by independent third
party testing. The cleanliness report is available upon request.
The Lufran fluoropolymer inline water heaters are available in wattages from 24kW to 312kW. These
units consist of one or more heating columns combined with a control system and all necessary power
distribution circuitry in a freestanding enclosure. The table on page 10 shows the various wattages with
the corresponding number of heating columns. The photo on the cover shows a typical Lufran unit with
two heating columns.
CE certification is available as an optional feature.
2
M-43-25 LUF-Series Lufran Manual
Revision - Date 03-01-04-18 Standard outlet, Standard Interface