Process Technology Lufran LUF Series Manual page 10

Engineering Information (Continued):
Model Number (Continued):
LUF-130-3LL6-SK

Heater Inlet, Outlet Plumbing Connections.
The heater inlet and outlet plumbing connections are usually the same. However, it is possible to have
different plumbing connections for the inlet and outlet.
connections have the same designation for both the inlet and outlet connections. Please refer to the table
below to see the specific plumbing connections provided with the heater:
Heater Model
Number
A
B
C
D
E
F
G
H
I
J
K
L
M
N
P
Q
R
U

Flow Meter Device. The ultrasonic flow meter device is part of the DAC temperature control system.
The flow meter is selected based upon total wattage of the heater and operating flow rate range. This
device does not require routine maintenance or re-calibration.
Heater Model
Number
0-4
M-43-25
Revision - Date 03-01-04-18
   
Plumbing Connection Type
Flared Tube Fitting
Flared Tube Fitting
Flared Tube Fitting
Union manifold Connector
Flange
NPT Pipe Threads, Female
NPT Pipe Threads, Female
NPT Pipe Threads, Female
NPT Pipe Threads, Male
NPT Pipe Threads, Male
NPT Pipe Threads, Male
Butt Fusion Union
BCF Union
Socket Fusion Union
Pillar Tube Fitting
Pillar Tube Fitting
Pillar Tube Fitting
Socket Fusion Union (Standard)
Device
Brand
5 Thornton
6 Thornton
7
Honda
8 Honda
9 Thronton

The characters to describe the plumbing
Plumbing Connection Size: mm (in)
Water Flow Process Technology
Range Part Number
2-20 LPM
10-70 LPM
0.5-20 LPM
1-50 LPM 09-6820
15-150 LPM
9
LUF-Series Lufran Manual
Standard outlet, Standard Interface
13mm (1/2-inch)
19mm (3/4-inch)
25mm (1-inch)
32mm (1 ¼-inch)
19mm (3/4-inch)
13mm (1/2-inch)
19mm (3/4-inch)
25mm (1-inch)
13mm (1/2-inch)
19mm (3/4-inch)
25mm (1-inch)
25mm (1-inch)
32mm (1 ¼-inch)
32mm (1 ¼-inch)
13mm (1/2-inch)
19mm (3/4-inch)
25mm (1-inch)
25mm (1-inch)
8136
8137
9238
9964