Removing The Car Seat - CYBEX ATON Short Manual

21
• insert the lap belt k into the blue belt guides m on both
sides of the car seat.
• Pull the diagonal belt l in driving direction to tighten the
lap belt k.
• Pull the diagonal belt l behind the top end of the baby
seat.
NoTE! do not twist the car belt.
• Bring the diagonal belt l into the blue belt slot n on the
back.
• tighten the diagonal belt l.
WARNING! in some cases the buckle q of the car
safety belt may be too long and reach into the belt
slots of the CYBEX ATON, making it diffi cult to install
the Aton securely. if this is the case please choose
another position in the car.

REMoVING THE CAR SEAT

• take the seat belt out of the blue belt slot n in the back.
• open the car buckle q and take the lap belt k out of the
blue belt slots m.