1.3
Linear encoder manufactured by Mitutoyo
(absolute type)
The battery for the absolute position is not required when constructing an absolute position detection system.
AT343A
Cable structure
Prepare a cable based on the following configuration diagram.
■ For linear servo motors
• MR-J5-_/MR-J5W_-_G_
MR-J5-_
CN2
or
MR-J5W_-_G_
Branch cable
CN2A
CN2
CN2B
*1
CN2C
Conditions
When using an optional encoder
cable
When fabricating the encoder cable
When not using a branch cable
*1 The connection to CN2C is for the MR-J5W3-_G_. The MR-J5W2-_G_ does not have CN2C.
*2 Supplied by customer
*3 For thermistor signal connectors, change the connection method depending on the system being used.
Encoder cable 2
Encoder cable 1
(1)
(4)
SCALE
Linear servo motor thermistor
*3
THM
Branch cable
(4) MR-J4THCBL03M
Page 74 MR-J4THCBL03M
branch cable
(5)
Linear servo motor thermistor
(3)
(2)
Encoder cable
(1) MR-EKCBL_M-H
2 m/5 m
Page 72 MR-EKCBL_M-H
encoder cable
(2) MR-ECNM connector set
Page 9 Encoder cable 1
(5) MR-ECNM connector set
Page 10 Encoder cable 2
1.3 Linear encoder manufactured by Mitutoyo (absolute type)
Linear encoder
AT343A
Output cable
(3) Options manufactured by
*2
Mitutoyo
Part No.09BAA598A: 0.2 m
Part No.09BAA598B: 2 m
Part No.09BAA598C: 3 m
1 LINEAR ENCODER
1
7