Mitsubishi Electric MR-J5 User Manual page 40

■For fully closed loop system and scale measurement function
• MR-J5-_-RJ_
MR-J5-_-RJ_
CN2
CN2L
Equipment required to adjust and check signals
Signal
adjustment
software
Conditions
When using an optional
encoder cable
When fabricating the
encoder cable
*1 Supplied by customer
*2 In order to adjust and check signals when installing the LIDA 483, LIDA 485, LIDA 487, LIDA 489, LIDA 287, or LIDA 289, a personal
computer (with USB port), signal adjustment software, and a measuring device are required. For further details, contact Heidenhain
Corp.
1 LINEAR ENCODER
38
1.4 Linear encoder manufactured by Heidenhain
Rotary servo motor encoder
Encoder cable 1
(1)
(2)
*2
Personal
computer
Measuring device
Encoder cable
(1) Options manufactured by Heidenhain
630 856-×× _m
(2) MR-J3CN2 connector set
Page 39 Encoder cable 1
Serial interface conversion unit
(3)
*1
*1
(3) Junction connector
15-pin D-SUB (female)
Linear encoder
LIDA 483/LIDA 485/LIDA 487/
LIDA 489/LIDA 287/LIDA 289
Head cable
Serial interface Head cable
conversion unit
EIB 392M Linear encoder accessory
Cable length: 0.5 m Cable length: 3 m
*1
(Heidenhain)