Linear Encoder Pslh041 Manufactured By Nidec Sankyo (Incremental Type) - Mitsubishi Electric MR-J5 User Manual

1.7
Linear encoder PSLH041 manufactured by NIDEC
SANKYO (Incremental type)
Cable structure
Prepare cables based on the following configuration diagram.
■For the linear servo motor
• MR-J5-_/MR-J5W_-_G_
MR-J5-_
CN2
or
MR-J5W_-_G_
CN2A
CN2
CN2B
*1
CN2C
Conditions
When using a branch cable
When not using a branch
cable
*1 The connection to CN2C is for the MR-J5W3-_G_. The MR-J5W2-_G_ does not have CN2C.
*2 Encoder cables are to be fabricated by the customer. Optional cables are not available.
*3 Supplied by customer
*4 For thermistor signal connectors, change the connection method depending on the system being used.
1 LINEAR ENCODER
64

1.7 Linear encoder PSLH041 manufactured by NIDEC SANKYO (Incremental type)

Encoder cable 2
(4)
Encoder cable 1
(1)
Branch cable
(3) SCALE
*4
THM
Branch cable Encoder cable
(3) MR-J4THCBL03M (1) MR-J3CN2 connector set
Page 74 MR- Page 67 Encoder cable 1
J4THCBL03M branch cable

(4) MR-J3CN2 connector set
Page 68 Encoder cable 2
(2)
Linear servo motor thermistor
(2)
Linear servo motor thermistor
*2
(2) Junction connector
15-pin D-SUB (female)
Linear encoder
PSLH041
Output cable
Output cable
*3
Linear encoder accessory
Cable length: 0.4 m