Download Print this page

Installing The Interface Module Carrier; Interface Module Installation - Cisco ASR 907 Installing

Hide thumbs Also See for ASR 907:

Table of Contents

Installing the Interface Module Carrier

Note

It is recommended that you always install the IM carrier (A9XX-2IMA-CARRIER) in the lower slot before

installing the carrier in the upper slot.

Procedure

Step 1

Before inserting an IM carrier, make sure that the chassis is grounded.

Step 2

To insert the IM carrier, carefully align the edges of the IM carrier between the upper and lower edges of the

router slot.

Step 3

Carefully slide the IM carrier into the router slot until the IM carrier makes contact with the backplane. See

the figure below.

Figure 22: Installing the IM Carrier

The following sections describe the various tasks of associated with interface module installation on the Cisco

ASR 907 Router:

Installing the Cisco ASR 907 Router

Table of Contents