Cisco ASR 907 Installing page 36

Recommended Power Cables
Figure 26: Installing the 1200 Watts AC Power Supply
Step 4 Tighten the captive installation screws of the power supply. The recommended maximum torque is 5.5 in.-lb
(.62 N-m).
Warning
Recommended Power Cables
We recommend the following power cables for Cisco ASR 907 routers:
Table 2: Power Cable PIDs for A900-PWR1200-A (1200 W)
PID
PWR-CAB-AC-USA520
PWR-CAB-AC-USA
Installing the Cisco ASR 907 Router
36
Power supply captive installation screws must be tight to ensure protective grounding continuity.
Description
US AC Power Cord for Cisco ASR 900, NEMA 5-20
Power Cord for AC V2 Power Module (USA), NEMA L6-20P
Installing the Cisco ASR 907 Router