Dhw Tank - Samsung AE090JNYDEH Installation Manual

DHW tank

DHW tank should be purchased separately (not supplied) .
Safety information
(Before installing an DHW Tank, please read this manual thoroughly to ensure that you know how to safely and efficiently
install a new appliance . )
WARNING
f The installation must be done by the manufacturer or its service agent or a qualified person in order to avoid a hazard . f
- Installation by an unqualified person may cause a water leakage, electric shock or fire and so on .
f The electric work must be done by service agent or qualified persons according to national wiring regulations and use
f
only rated cable .
- Use certified power cable in the market suggested here and do electric work according to installation manual
otherwise, electric shock or fire may occur .
f Install the outdoor unit correctly according to the installation manual . f
- An incorrect installation may cause a water leakage, electric shock or fire and so on .
f Manufacturer is not responsible for accidents due to incorrect installation . f
f Use certified parts in the market and supplied parts from the factory . f
- All wiring, components and materials to be procured on the site must comply with the applicable local and national
codes . If you don't use the certified parts and tools, it can cause trouble to the Air to Water Heat pumpand bring into
injury .
f Install the DHW Tank on a hard and even place that can support its weight . f
- If the place cannot support its weight, the outdoor unit may fall down and it may cause injury .
f Fix the outdoor unit securely on foundation it can fall over strong wind or earthquake . f
- If the outdoor unit is not properly fixed, it turns over and accidents may occur .
f Secure power cable with a conduit, which is accessory part for DHW tank, not to be pulled out by external force . f
- If fixing is incomplete, it can cause trouble with a heat generation, electric shock or fire and so on .
GENERAL INFORMATION
f The piping, valves and system configuration of DHW tank system should be followed a relevant local or national
f
regulations .
f A pressure relief valve in accordance with an opening pressure of max . 0 . 9 MPa should be connected . f
f The electrical box must be opened by a licensed electrician . f
f Switch off the power supply before opening the electrical box lid . f
f Make sure that the installation location of DHW tank system including piping and valves is frost free . f
• DHW Tank shall be located and installed indoors (garage, multipurpose room, boiler room) .
CAUTION
• If you don't follow the safety precautions, you may get the risk of serious wound or death .
ENGLISH-39