Domestic Hot Water (Dhw) Mode - Samsung MIM-E03EN User Manual

Domestic Hot Water (DHW) mode

Press the button to enter the Setting screen from the Home screen with the DHW activated. On each
screen, press the and then press the
and Forced modes.
NOTE
When the DHW mode is not supported, "Not Supported" appears.
To operate hot water mode, you need to set the hot water function 'Yes' in the field specification setting
mode (#3011) of wired remote controller and connect the temperature sensor of hot water tank.
When the Cool/Heat mode and the DHW mode are selected at the same time, the Cool/Heat mode and
the DHW mode will operate alternately.
(power) for the DHW mode cannot be used when the Booster heater is not in use.
If you want to enjoy a leisurely bath or need a lot of warm water urgently, select the Forced mode. When
this mode is enabled, it is assured that the full capacity of the heat pump is only delivered for domestic
water heating.
CAUTION
By default field setting value option, this function will not be turned off automatically.
If you want a Forced mode for a certain amount of duration time, change the field setting value of
remote controller.
or button to select and use any of Economic, Standard, Power,
English 7