Dhw Mode - Samsung MIM-E03*N User Manual

DHW mode

You can adjust temperature of hot water tank by providing hot water.
Press the Mode button in DHW.
f Select (economic),
f
pressing the Mode button in DHW section.
• To operate hot water mode, you need to set the hot water function 'Yes' in the
fi eld specifi cation setting mode(#3011) of wired remote controller and connect
NOTE
the temperature sensor of hot water tank.
• When cool/heat mode and DHW mode are selected at the same time, the heat/
cool mode and DHW mode will operate alternately.
• (power) for DHW mode cannot be used when the Booster heater is not in
use.
❋ ❋ Forced DHW mode
• If you want to enjoy a leisurely bath or need a lot of warm water urgently,
select the Forced DHW mode.
• When this mode is enabled, it is assured that the full capacity of the heat pump
is only delivered for domestic water heating.
• By default fi eld setting value option, this function will not be turned off
automatically.
CAUTION
• If you want a Forced DHW function for a certain amount of duration time,
change the fi eld setting value of remote controller.
ENGLISH-17
(standard), and (power), (forced) by