Samsung AE090JNYDEH Installation Manual page 43

DHW tank
Switch box layout
N N L L N N L L
N N L L
To DHW tank
❋ ❋ Use a correct sensor pocket which is fit for the DHW tank sensor(OD Ø6) .
If the gap between the supplied sensor and DHW tank sensor pocket is big, use thermal grease .
• When you set the hot water supply temperature to 55°C or less, do not use the booster heater .
- The heatpump and the booster heater operate until the initial set temperature is reached . After that, only the
NOTE
booster heater may operate depending on the settings .
ENGLISH-42
DHW Tank Temp . (15m)
CNS042(YEL)